Navigate BIOS Setup Utility Menus
To navigate the menus or options listed on a menu, use the arrow keys. The
currently selected option or sub-menu is highlighted. For further instructions
on how to navigate and change settings in the BIOS Setup Utility, refer to the
online information provided on the menu.
-
Access the BIOS Setup Utility.
See Access BIOS Setup Utility Menus.
-
Use the left and right arrow keys to select the different primary menu
options.
As you select each menu option, the top-level screen for that menu option
appears.
-
To navigate options presented on a top-level screen, use the up and down
arrow keys.
Only options that can be modified are highlighted when you press the up
and down arrow keys.
-
If an option can be modified, as you select the option, user
instructions for modifying the option appear in the right column of
the screen.
-
If an option is a link to a sub-screen, a description of the
sub-menu content appears in the right column.
-
Modify an option by pressing the + or - (plus or minus) keys or by
pressing Enter and selecting the desired option from the pop-up
menus.
-
Press the Esc key to return from a sub-menu screen to the previous menu
screen.
Pressing Esc from a top-level menu is equivalent to selecting the Discard
Changes and Exit option from the Save & Exit Menu.
-
Modify parameters as needed.
-
Press the F10 key to save your changes and exit the BIOS Setup
Utility.
Alternatively, you can select the Save & Exit menu, and then select
Save Changes and exit to save your changes and exit the BIOS Setup
Utility.
Note -
After modifying any BIOS settings, the subsequent reboot might take
longer than a typical reboot where no settings were modified. The
additional delay is required to ensure that changes to the BIOS settings
are synchronized with Oracle ILOM.