You can access the server module SP directly by connecting a dongle cable to the UCP on the front of the server module.
Caution - Dongle cables are intended for setup, testing, or service purposes and should be removed when not in use. These cables have not been evaluated for electromagnetic compatibility compliance and are not to be used during normal system operation.
8N1 (eight data bits, no parity, one stop bit)
9600 baud (the default, but can be set to any standard rate up to 57600)
Disable hardware flow control (CTS/RTS)
If possible, use a three-connector UCP-3 dongle cable rather than a four-connector UCP-4. See Server Module Cabling for more information about the UCP and the dongle cables.
For a UCP-3 dongle cable, use the RJ-45 connector.
For a UCP-4 dongle cable, use the DB-9 serial connector (TTYA). If you need to make an RJ-45 connection to a UCP-4, do so through a DB-9-to-RJ-45 adapter attached to the DB-9 connector.
The Oracle ILOM login prompt is displayed on the terminal or terminal emulator.
The default user is root. The default password is changeme.
You are now logged into Oracle ILOM on the server module SP. You can continue to power on the server module host for the first time. See Powering On the Server Module for the First Time