You can connect to the CMM through the RJ-45 NET MGT 0 Ethernet port. While this Ethernet connection supports both the CLI and the web interface to the CMM SP, this installation procedure uses the CLI.
The network connection is through the RJ-45 connector labeled NET MGT 0 on the CMM.
$ ssh root@ipaddress
Replace ipaddress with the IP address of the CMM.
The factory default Oracle ILOM root password is changeme.
Password: CMM_ILOM_password Oracle(TM) Integrated Lights Out Manager Version 3.x.x ... Warning: password is set to factory default. ->
You are now logged in to the CMM ILOM CLI.
Note - When you are ready to log out of the CMM ILOM, type exit.
-> cd /CH/BLn/SP/cli
Replace n with a number that identifies the chassis slot in the modular system where the target server module is installed.
-> start Are you sure you want to start /CH/BLn/SP/cli (y/n)? y start: Connecting to /CH/BLn/SP/cli as user root
If you are prompted for a password for the root user on the server module SP, type changeme (the factory default password).
You are now logged into Oracle ILOM on the server module SP.