If your network uses DHCP to assign IP addresses, the DHCP device will automatically assign an IP address to the SP. If your network does not use DHCP, follow this procedure to assign a static IP address to the SP.
Note - For more information on configuring Oracle ILOM, refer to the Servers Administration and the Oracle ILOM documentation.
For serial connection instructions, see Connect a Terminal or Emulator to the SER MGT Port. Log in to the SP as root (changeme is the default root password) to display the Oracle ILOM prompt.
hostname login: root Password: password (nothing displayed) Oracle(R) Integrated Lights Out Manager Version 22.214.171.124 Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved. Warning: password is set to factory default. ->
-> set /SP/network pendingipdiscovery=static Set 'pendingipdiscovery' to 'static'
-> set /SP/network pendingipaddress=service-processor-IPaddr Set 'pendingipaddress' to 'service-processor-IPaddr'
-> set /SP/network pendingipgateway=gateway-IPaddr Set 'pendingipgateway' to 'gateway-IPaddr'
-> set /SP/network pendingipnetmask=255.255.255.0 Set 'pendingipnetmask' to '255.255.255.0'
This example uses 255.255.255.0 to set the netmask. Your network environment subnet might require a different netmask. Use a netmask number most appropriate to your environment.
-> show /SP/network -display properties /SP/network Properties: commitpending = (Cannot show property) dhcp_server_ip = none ipaddress = xxx.xxx.xxx.xxx ipdiscovery = dhcp ipgateway = xxx.xxx.xxx.xxx ipnetmask = 255.255.255.0 macaddress = 00:21:28:6F:A7:BB managementport = /SYS/MB/SP/NETMGMT outofbandmacaddress = 00:21:28:6F:A7:BB pendingipaddress = xxx.xxx.xxx.xxx pendingipdiscovery = static pendingipgateway = xxx.xxx.xxx.xxx pendingipnetmask = 255.255.255.0 pendingmanagementport = /SYS/MB/SP/NETMGMT sidebandmacaddress = 00:21:F8:6F:A7:BA state = enabled ->
You must perform this action for the new values to take effect.
-> set /SP/network commitpending=true Set 'commitpending' to 'true'
-> show /SP/network -display properties /SP/network Properties: : : ->
Refer to the Servers Administration and Server Service.
Oracle ILOM documentation