This section describes some advanced topics related to using Fibre Channel SR-IOV virtual functions.
The ldg2 console log shows the operations of the assigned Fibre Channel virtual function device. Use the fcadm command to view and access the Fibre Channel virtual function device.
ldg2# fcadm hba-port
HBA Port WWN: 100000144ffb8a99
Port Mode: Initiator
Port ID: 13d02
OS Device Name: /dev/cfg/c3
Manufacturer: Emulex
Model: 7101684
Firmware Version: 7101684 1.1.60.1
FCode/BIOS Version: Boot:1.1.60.1 Fcode:4.03a4
Serial Number: 4925382+133400002R
Driver Name: emlxs
Driver Version: 2.90.15.0 (2014.01.22.14.50)
Type: N-port
State: online
Supported Speeds: 4Gb 8Gb 16Gb
Current Speed: 16Gb
Node WWN: 200000144ffb8a99
NPIV Not Supported
Use the format command to show the visible LUNs.
ldg2# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c2d0 <Unknown-Unknown-0001-25.00GB>
/virtual-devices@100/channel-devices@200/disk@0
1. c3t21000024FF4C4BF8d0 <SUN-COMSTAR-1.0-10.00GB>
/pci@340/pci@1/pci@0/pci@6/SUNW,emlxs@0,2/fp@0,0/ssd@w21000024ff4c4bf8,0
Specify disk (enter its number): ^D
ldg2#