The section describes information related to using the Integrated Lights Out Manager (ILOM) service processor (SP) with the Logical Domains Manager. For more information about using the ILOM software, see the documents for your specific platform at http://www.oracle.com/technetwork/documentation/sparc-tseries-servers-252697.html.
An additional config option is available to the existing ILOM command:
-> set /HOST/bootmode config=config-name
This option enables you to set the SP configuration on the next power on to an different SP configuration, including the factory-default shipping configuration.
You can invoke the command regardless of whether the host is powered on or off. It takes effect on the next host reset or power on.
To reset the logical domain configuration, you set the option to factory-default.
-> set /HOST/bootmode config=factory-default
You also can select other SP configurations that have been created with the Logical Domains Manager using the ldm add-spconfig command and stored on the service processor (SP). The name you specify in the Logical Domains Manager ldm add-spconfig command can be used to select that SP configuration with the ILOM bootmode command. For example, assume you stored the SP configuration with the name ldm-config1.
-> set /HOST/bootmode config=ldm-config1
Now, you must perform a power cycle of the system to load the new SP configuration.
See the ldm(1M) man page for more information about the ldm add-spconfig command.