Oracle^® VM Server for SPARC 3.5 Administration Guide

How to Re-Enable the ILOM Interconnect Service

The ilomconfig-interconnect service is enabled by default. Use this procedure if you need to re-enable this service manually.

1. Enable the ILOM interconnect service.

   primary# svcadm enable ilomconfig-interconnect

2. Verify that the ilomconfig-interconnect service is enabled.

   primary# svcs ilomconfig-interconnect
   STATE          STIME    FMRI
   online          9:53:28 svc:/network/ilomconfig-interconnect:default

3. Verify that the ILOM interconnect is configured properly.

   A proper ILOM interconnect configuration shows the State value as enabled and the Host Interconnect IP Address value as an IP address and not none.

   primary# ilomconfig list interconnect
   Interconnect
   ============
   State: enabled
   Type: USB Ethernet
   SP Interconnect IP Address: 169.254.182.76
   Host Interconnect IP Address: 169.254.182.77
   Interconnect Netmask: 255.255.255.0
   SP Interconnect MAC Address: 02:21:28:57:47:16
   Host Interconnect MAC Address: 02:21:28:57:47:17

4. Verify that the ldmd daemon can communicate with the SP.

   primary# ldm list-spconfig