Go to main content

Oracle^® VM Server for SPARC 3.5 Administration Guide

Exit Print View

» ...Documentation Home » Oracle VM Server for SPARC 3.5 Documentation ... » Oracle^® VM Server for SPARC 3.5 ... » Using Virtual SCSI Host Bus Adapters » Installing a Virtual LUN

Updated: November 2017

Oracle^® VM Server for SPARC 3.5 Administration Guide

Document Information

Using This Documentation

Chapter 1 Overview of the Oracle VM Server for SPARC Software

Chapter 2 Oracle VM Server for SPARC Security

Chapter 3 Setting Up Services and the Control Domain

Chapter 4 Setting Up Guest Domains

Chapter 5 Using Domain Consoles

Chapter 6 Configuring I/O Domains

Chapter 7 Creating a Root Domain by Assigning PCIe Buses

Chapter 8 Creating an I/O Domain by Using PCIe SR-IOV Virtual Functions

Chapter 9 Creating an I/O Domain by Using Direct I/O

Chapter 10 Using Non-primary Root Domains

Chapter 11 Using Virtual Disks

Chapter 12 Using Virtual SCSI Host Bus Adapters

Introduction to Virtual SCSI Host Bus Adapters

Operational Model for Virtual SCSI HBAs

Virtual SCSI HBA Identifier and Device Name

Managing Virtual SCSI HBAs

Appearance of Virtual LUNs in a Guest Domain

Virtual SCSI HBA and Virtual SAN Configurations

Configuring Virtual SCSI HBA Multipathing

Booting From SCSI Devices

Installing a Virtual LUN

Virtual SCSI HBA Timeout

Virtual SCSI HBA and SCSI

Simulating a LUN0

Chapter 13 Using Virtual Networks

Chapter 14 Migrating Domains

Chapter 15 Managing Resources

Chapter 16 Managing SP Configurations

Chapter 17 Handling Hardware Errors

Chapter 18 Performing Other Administration Tasks

Appendix A Using Power Management

Language:

Installing a Virtual LUN

You can install an OS on any virtual LUN whose associated physical LUN references a SCSI device whose type is supported by the installation program. You can then boot from the specified virtual LUN.

Copyright © 2007, 2017, Oracle and/or its affiliates. All rights reserved.