| | | |
A |
|
| activation de l'emplacement de la partie résidente du système ( ) |
|
| adaptateurs |
| | adresses IP de test ( ) |
| | Ethernet |
| | | configuration de la variable local-mac-address? ( ) |
| | | exigences de la variable local-mac-address? ( ) |
| | | modification de la variable local-mac-address?pendant la mise à niveau ( ) |
| | exigences en matière de groupes multi-acheminement sur réseau IP ( ) |
| | SCI-PCI |
| | | configuration minimale requise par le module ( ) |
| | | configuration sur d'autres noeuds ( ) |
| | | configuration sur le premier noeud ( ) |
| | | installation de modules Sun Cluster avec JumpStart ( ) |
| | | installation des modules Solaris ( ) |
| | | installation des modules Solaris avec JumpStart ( ) |
| | | installation des modules Sun Cluster ( ) ( ) ( ) ( ) |
| | | noms de port ( ) ( ) ( ) |
| | suppression de données de configuration erronées ( ) |
|
| adaptateurs de transport |
| | Voir adaptateurs | |
|
| adaptateurs Ethernet |
| | variable local-mac-address? |
| | | configuration ( ) |
| | | exigences ( ) |
| | | modification pendant la mise à niveau ( ) |
|
| adaptateurs PCI |
| | Voir adaptateurs SCI-PCI | |
|
| adaptateurs SCI-PCI |
| | configuration |
| | | sur d'autres noeuds ( ) |
| | | sur le premier noeud ( ) |
| | configuration minimale requise par le module |
| | | Solaris ( ) |
| | installation |
| | | modules Solaris ( ) |
| | | modules Solaris avec JumpStart ( ) |
| | | modules Sun Cluster ( ) ( ) ( ) |
| | | modules Sun Cluster avec JumpStart ( ) ( ) |
| | noms de port ( ) ( ) ( ) |
|
| adresses IP, planification ( ) |
|
| adresses IP de test, exigences ( ) |
|
| adresses logiques, planification ( ) |
|
| aide ( ) |
|
| aide en ligne, module Sun Cluster pour Sun Management Center ( ) |
|
| ajout |
| | Voir aussi installation | |
| | hôtes médiateur ( ) |
| | lecteurs de disque à un ensemble de disques ( ) |
| | noeuds du module Sun Cluster pour Sun Management Center ( ) |
|
| annulation de l'encapsulage du disque racine ( ) |
|
| Apache |
| | installation de modules ( ) |
| | modification des liens pendant la mise à niveau ( ) |
|
| autorisation RBAC, ajout de comptes utilisateur ( ) |
|
| autre chemin d'initialisation, affichage ( ) |
| | | |
C |
|
| CCP |
| | Voir Cluster Control Panel (CCP) | |
|
| chaînes de disques, médiateurs obligatoires ( ) |
|
| champ md_nsets, planification ( ) |
|
| champ nmd, planification ( ) |
|
| chargement du module Sun Cluster pour Sun Management Center ( ) |
|
| Cluster Control Panel (CCP) |
| | démarrage ( ) |
| | installation ( ) |
|
| commande /etc/init.d/xntpd.cluster start ( ) |
|
| commande /etc/init.d/xntpd start ( ) |
|
| commande /opt/SUNWcluster/bin/ccp ( ) |
|
| commande /usr/cluster/bin/scconf, ajout de noeuds à la liste d'authentification ( ) |
|
| commande cconsole ( ) |
|
| commande ccp ( ) |
|
| commande sccheck |
| | contrôle de préinstallation ( ) |
| | contrôle du fichier vfstab ( ) |
|
| commande scconf |
| | activation de la propriété localonly ( ) ( ) ( ) |
| | activation de la propriétélocalonly ( ) |
| | affichage des noms d'hôtes privés ( ) |
| | ajout de noeuds à la liste d'authentification ( ) |
| | e suppression des noeuds d'une liste de noeuds ( ) ( ) ( ) |
| | suppression de données d'interconnexion erronées ( ) |
| | suppression des noeuds d'une liste de noeuds ( ) |
| | vérification du mode d'installation ( ) |
|
| commande scdidadm |
| | affichage des noms d'identificateur de périphérique (DID) ( ) |
| | détermination des noms DID ( ) |
|
| commande scgdevs, mise à niveau de l'espace de noms des périphériques globaux ( ) |
|
| commande scinstall |
| | désinstallation de Sun Cluster ( ) |
| | installation des services de données ( ) |
| | installation du premier noeud ( ) |
| | installation JumpStart ( ) |
| | installation sur d'autres noeuds ( ) |
| | mise à niveau ( ) |
|
| commande scsetup |
| | configuration post-installation ( ) |
| | enregistrement des groupes de périphériques de disques ( ) |
| | modification des noms d'hôtes privés ( ) |
|
| commande scstat, vérification de la configuration des groupes de disques ( ) |
|
| commande scswitch, évacuation des groupes de ressources et des groupes de périphériques ( ) |
|
| commande scvxinstall |
| | installation de VxVM et encapsulage du disque root ( ) |
| | installation de VxVM uniquement ( ) |
|
| commande telnet, numéros de ports série ( ) |
|
| commande xntpd.cluster start ( ) |
|
| commande xntpd start ( ) |
|
| commutateur de services de noms, configuration ( ) |
|
| comptes utilisateur, configuration pour SunPlex Manager ( ) |
|
| Concentrateurs de terminal (TC) |
| | Voir dispositifs d'accès par console | |
|
| configuration |
| | commutateur de services de noms ( ) |
| | comptes utilisateur pour SunPlex Manager ( ) |
| | ensembles de disques ( ) |
| | environnement de travail de l'utilisateur ( ) |
| | fichier md.tab ( ) |
| | fichier ntp.conf ( ) |
| | groupes multi-acheminement sur réseau IP ( ) ( ) |
| | périphériques de quorum ( ) |
| | protocole NTP (Network Time Protocol) ( ) |
| | répliques de bases de données d'état ( ) |
| | Solaris Volume Manager ( ) |
| | Solstice DiskSuite ( ) |
| | systèmes de fichiers de grappe ( ) |
| | VERITAS Volume Manager (VxVM) ( ) |
|
| conflits de codes mineurs, repairing ( ) |
|
| connexion UFS, configuration ( ) |
|
| console administrative |
| | adresses IP ( ) |
| | MANPATH ( ) |
| | PATH ( ) |
|
| contrôle |
| | Voir vérification | |
|
| contrôleurs de système (SC) |
| | Voir dispositifs d'accès par console | |
|
| Convention d'appellation d'après la baie, planification ( ) |
|
| correctifs, planification ( ) |
|
| correction, conflits de codes mineurs ( ) |
|
| correstion, données du médiateur ( ) |
|
| création |
| | Voir configuration | |
| | | |
D |
|
| démon vold ( ) |
|
| démon xntpd, messages d'erreur ( ) |
|
| déplacement des groupes de périphériques de disques ( ) |
|
| désactivation du mode d'installation ( ) |
|
| désinstallation de Sun Cluster ( ) |
|
| DID |
| | Voir identificateurs de périphérique (DID) | |
|
| dispositif d'accès par console, planification ( ) |
|
| dispositifs d'accès par console |
| | adresses IP ( ) |
| | numéros de ports série ( ) |
|
| disques |
| | Voir lecteurs de disque | |
|
| disques de partition dynamique, planification ( ) |
|
| disques multihôtes, mise en miroir ( ) |
|
| disques multiports, planification ( ) |
|
| disques racine |
| | désencapsulage ( ) |
| | mise en miroir ( ) |
| | | planification ( ) |
|
| disques racine encapsulés disks, planification ( ) |
|
| disques racine secondaires ( ) |
|
| disques root |
| | encapsulage ( ) |
| | mise en miroir |
| | | message d'avertissement ( ) |
|
| disques root encapsulés |
| | configuration ( ) |
| | mise en miroir ( ) |
|
| DRL |
| | Voir système DRL (Dirty Region Logging) | |
|
| Dynamic Multipathing (DMP) ( ) ( ) |
| | | |
E |
|
| enregistrement, VxVM groupes de périphériques de disques ( ) |
|
| ensembles de disques |
| | ajout à des ensembles de disques ( ) |
| | ajout de lecteurs de disque ( ) |
| | configuration ( ) |
| | configuration du nombre maximum autorisé ( ) |
| | création de partitions de disques ( ) |
| | planification du nombre maximum ( ) |
|
| environnement de travail de l'utilisateur, modification des fichiers d'initialisation utilisateur ( ) |
|
| environnement racine, configuration ( ) |
|
| état |
| | médiateurs ( ) |
| | Sun Cluster |
| | | journal d'installation de SunPlex Manager ( ) |
| | | journaux d'installation ( ) |
| | | vérification ( ) |
|
| /etc/user_attr, ajout des utilisateurs au ( ) |
|
| exécution de Sun Management Center ( ) |
| | | |
F |
|
| fichier .cdtoc, exigences concernant l'installation SunPlex Manager ( ) |
|
| fichier /etc/clusters, console administrative ( ) |
|
| fichier /etc/inet/hosts ( ) ( ) |
| | JumpStart ( ) |
|
| fichier /etc/inet/ntp.conf |
| | configuration ( ) |
| | modification pendant la mise à niveau ( ) |
| | par défaut ( ) |
|
| fichier /etc/lvm/md.tab ( ) |
|
| fichier /etc/name_to_major |
| | sur des noeuds non-VxVM ( ) ( ) ( ) |
| | sur les noeuds VxVM installés ( ) ( ) ( ) |
|
| fichier /etc/nsswitch.conf ( ) |
|
| fichier /etc/release ( ) |
|
| fichier /etc/serialports ( ) |
|
| fichier /etc/system |
| | valeur du volume de la pile ( ) |
| | variable kernel_cage_enable ( ) |
|
| fichier /etc/vfstab |
| | ajout de points de montage ( ) |
| | contrôle de la configuration ( ) |
| | modification pendant la mise à niveau ( ) |
|
| fichier /kernel/drv/md.conf ( ) |
| | configuration ( ) |
| | message d'avertissement ( ) ( ) |
|
| fichier autoscinstall.class ( ) |
|
| fichier class, modification ( ) |
|
| fichier hosts ( ) |
| | JumpStart ( ) |
|
| fichier md.conf |
| | configuration ( ) |
| | message d'avertissement ( ) |
| | planification ( ) |
|
| fichier md.tab, configuration ( ) |
|
| fichier name_to_major |
| | sur des noeuds non VxVM ( ) |
| | sur des noeuds non-VxVM ( ) ( ) |
| | sur les noeuds VxVM installés ( ) |
|
| fichier nsswitch.conf, configuration ( ) |
|
| fichier ntp.conf |
| | configuration ( ) |
| | modification pendant la mise à niveau ( ) |
| | par défaut ( ) |
|
| fichier release ( ) |
|
| fichier scinstall.log.pid ( ) |
|
| fichier serialports ( ) |
|
| fichier system |
| | valeur du volume de la pile ( ) |
| | variable kernel_cage_enable ( ) |
|
| fichier user_attr, ajout des utilisateurs au ( ) |
|
| fichier vfstab |
| | ajout de points de montage ( ) |
| | contrôle de la configuration ( ) |
| | modification pendant la mise à niveau ( ) |
|
| fichiers d'initialisation, configuration de l'environnement de travail de l'utilisateur ( ) |
| | | |
G |
|
| gestionnaires de volumes |
| | partitions ( ) |
| | planification |
| | | généralités ( ) |
| | | Solaris Volume Manager ( ) |
| | | Solstice DiskSuite ( ) |
| | | VERITAS Volume Manager ( ) |
|
| grappes fichier, console administrative ( ) |
|
| groupes de disques |
| | Voir aussi groupes de périphériques de disque | |
| | configuration ( ) |
|
| groupes de disques racine (rootdg) |
| | configuration |
| | | sur des disques non racine ( ) |
| | planification ( ) |
|
| groupes de disques root (rootdg) |
| | configuration |
| | | sur les disques root encapsulés ( ) |
|
| groupes de périphériques |
| | Voir groupes de périphériques de disques | |
|
| groupes de périphériques de disque |
| | listes de noeuds |
| | | affichage ( ) |
| | | suppression des noeuds de ( ) |
|
| groupes de périphériques de disques |
| | affectation d'un nouveau code mineur ( ) |
| | enregistrement des groupes de disques en tant que ( ) |
| | évacuation ( ) |
| | importation et déplacement ( ) |
| | planification ( ) |
| | vérification de la configuration ( ) |
|
| groupes de ressources, évacuation ( ) |
|
| groupes multi-acheminement sur réseau IP |
| | configuration ( ) ( ) |
| | exigences en matière d'adresses IP de test ( ) |
| | planification ( ) |
|
| groupes NAFO |
| | Voir aussi groupes multi-acheminement sur réseau IP | |
| | mise à niveau vers les groupes multi-acheminement sur réseau IP ( ) |
| | | |
I |
|
| identificateurs de périphérique (DID) |
| | affichage des noms ( ) |
| | détermination de noeuds ( ) |
|
| importation des groupes de périphériques de disques ( ) |
|
| install mode, désactivation après l'installation ( ) |
|
| installation |
| | Voir aussi ajout | |
| | avertissement lors de la réinitialisation du premier noeud installé ( ) |
| | Cluster Control Panel (CCP) ( ) |
| | interface RSMAPI |
| | | modules Solaris ( ) |
| | l'interface RSMAPI |
| | | modules Solaris avec JumpStart ( ) |
| | | modules Sun Cluster avec JumpStart ( ) ( ) |
| | module Sun Cluster pour Sun Management Center ( ) ( ) |
| | modules Apache ( ) |
| | RSMAPI |
| | | modules Sun Cluster ( ) ( ) ( ) |
| | services de données |
| | | au moyen de scinstall ( ) |
| | | au moyen de SunPlex Manager ( ) |
| | Solaris |
| | | avec Sun Cluster ( ) |
| | | seul ( ) |
| | Solstice DiskSuite ( ) |
| | | à partir du CD-ROM de Solaris ( ) |
| | | au moyen de SunPlex Manager ( ) |
| | Sun Cluster ( ) |
| | | au moyen de JumpStart ( ) |
| | | au moyen de SunPlex Manager ( ) |
| | | autres noeuds ( ) |
| | | état ( ) |
| | | journaux ( ) |
| | | premier noeud ( ) |
| | | vérification ( ) |
| | SunPlex Manager ( ) ( ) |
| | | journaux ( ) |
| | VERITAS File System (VxFS) ( ) |
| | VERITAS Volume Manager (VxVM) ( ) |
| | | et encapsulage du disque root ( ) |
| | | sans encapsulage du disque root ( ) |
|
| interconnexion |
| | Voir interconnexion de grappe | |
|
| interconnexions de grappe |
| | planification ( ) |
| | suppression de données de configuration erronées ( ) |
|
| interfaces réseau de la console de domaine, adresses IP ( ) |
|
| IPMP |
| | Voir groupes multi-acheminement sur réseau IP | |
| | | |
M |
|
| MANPATH |
| | console administrative ( ) |
| | noeuds de la grappe ( ) |
|
| médiateurs |
| | ajout d'hôtes ( ) |
| | correction des données ( ) |
| | planification ( ) |
| | présentation ( ) |
| | vérification de l'état ( ) |
|
| messages d'erreur |
| | commande sccheck ( ) ( ) ( ) |
| | démon xntpd ( ) |
|
| métapériphériques |
| | activation ( ) |
| | configuration du nombre maximum autorisé ( ) |
| | planification du nombre maximum ( ) |
|
| mise à niveau ( ) |
| | instructions de ( ) |
| | module Sun Cluster pour Sun Management Center ( ) |
| | services de données ( ) |
| | Solaris ( ) |
| | Sun Management Center ( ) |
| | types de ressources ( ) |
| | vérification ( ) |
| | VERITAS Volume Manager (VxVM) ( ) |
|
| mise en miroir |
| | disques multihôtes ( ) |
| | disques racine ( ) |
| | | planification ( ) |
| | disques root |
| | | message d'avertissement ( ) |
| | planification ( ) |
|
| mise en miroir à trois voies ( ) |
|
| mode d'installation, vérification ( ) |
|
| mode mono-utilisateur sans grappe, réinitialisation en ( ) |
|
| mode sans grappe |
| | réinitialisation en ( ) |
| | réinitialisation en mode mono-utilisateur ( ) |
|
| module Sun Cluster pour Sun Management Center ( ) |
| | ajout de noeuds ( ) |
| | chargement ( ) |
| | exigences ( ) |
| | installation ( ) |
| | | |
P |
|
| partitions |
| | création de partitions de disques ( ) |
| | gestionnaire de volumes ( ) |
| | /globaldevices ( ) ( ) |
| | /sds ( ) |
|
| PATH |
| | console administrative ( ) |
| | noeuds de la grappe ( ) |
|
| périphériques de démarrage, détermination de l'autre chemin d'initialisation ( ) |
|
| périphériques de quorum |
| | configuration initiale ( ) |
| | et mise en miroir ( ) |
| | message d'avertissement ( ) |
| | planification ( ) |
|
| périphériques globaux |
| | /globaldevices partition |
| | | création ( ) |
| | | planification ( ) |
| | message d'avertissement ( ) |
| | mise à niveau de l'espace de noms ( ) |
| | planification ( ) |
| | répertoire /global/.devices |
| | | miroir ( ) |
| | | système de fichiers node@nodeid ( ) |
|
| points de montage |
| | modification du fichier /etc/vfstab ( ) |
| | systèmes de fichiers de la grappe ( ) |
|
| ports |
| | Voir ports série | |
|
| ports série |
| | configuration sur la console administrative ( ) |
| | protocole SNMP (Simple Network Management Protocol) ( ) |
|
| profil, JumpStart ( ) |
|
| propriété localonly, activation ( ) |
|
| protocole NTP (Network Time Protocol), configuration ( ) |
|
| Protocole SNMP (Simple Network Management Protocol), port de Sun Management Center ( ) |
| | | |
R |
|
| réinitialisation |
| | en mode mono-utilisateur sans grappe ( ) |
| | en mode sans grappe ( ) |
| | message d'avertissement ( ) |
|
| Remote Shared Memory Application Programming Interface (RSMAPI) |
| | configuration minimale requise par le module ( ) |
| | installation |
| | | modules Solaris ( ) |
| | | modules Solaris avec JumpStart ( ) |
| | | modules Sun Cluster ( ) ( ) ( ) |
| | | modules Sun Cluster avec JumpStart ( ) ( ) |
|
| répertoire /global ( ) |
|
| répertoire /opt/SUNWcluster/bin ( ) |
|
| répertoire /opt/SUNWcluster/man ( ) |
|
| répertoire /usr/cluster/bin ( ) |
|
| répertoire /usr/cluster/man ( ) |
|
| répertoire /var/cluster/spm ( ) |
|
| répertoire spm, journaux ( ) |
|
| répliques, configuration ( ) |
|
| répliques de bases de données d'état, configuration ( ) |
|
| réseau privé, planification ( ) |
|
| réseaux publics, planification ( ) |
|
| RSMAPI |
| | Voir Remote Shared Memory Application Programming Interface (RSMAPI) | |
| | | |
S |
|
| sccheck |
| | contrôle de préinstallation ( ) ( ) |
|
| script finish, JumpStart ( ) |
|
| /sds partition ( ) |
|
| serveurs Sun Enterprise 10000 |
| | fichier serialports ( ) |
| | prise en charge de la reconfiguration dynamique ( ) |
| | variable kernel_cage_enable ( ) |
|
| serveurs Sun Fire 15000 |
| | adresses IP ( ) |
| | numéros de port série ( ) |
|
| services de données |
| | installation au moyen de scinstall ( ) |
| | mise à niveau ( ) |
|
| servicesde données, installation au moyen de SunPlex Manager ( ) |
|
| SNMP, port de Sun Management Center ( ) |
|
| Solaris |
| | installation |
| | | avec Sun Cluster ( ) |
| | | seul ( ) |
| | mise à niveau ( ) |
| | planification ( ) |
| | | gestionnaires de volume ( ) |
| | | groupes de logiciels ( ) |
| | | partitions ( ) |
| | | swap ( ) |
| | | système de fichiers /globaldevices ( ) |
| | | système de fichiers racine (/) ( ) |
| | version ( ) |
|
| Solaris Volume Manager |
| | coexistence avec VERITAS Volume Manager ( ) ( ) |
| | configuration ( ) |
| | ensembles de disques |
| | | ajout de lecteurs de disque ( ) |
| | | configuration ( ) |
| | | configuration du nombre maximum autorisé ( ) |
| | | création de partitions de disques ( ) |
| | fichier md.tab ( ) |
| | Journalisation de volumes de transaction |
| | | planification ( ) |
| | MANPATH ( ) |
| | médiateurs |
| | | ajout d'hôtes ( ) |
| | | correction des données incorrectes ( ) |
| | | présentation ( ) ( ) |
| | | vérification de l'état ( ) |
| | miroir |
| | | espace de noms global ( ) |
| | mise en miroir |
| | | disques racine ( ) |
| | | système de fichiers racine (/) ( ) |
| | planification ( ) |
| | répliques de bases de données d'état ( ) |
| | volumes |
| | | activation ( ) |
| | | configuration du nombre maximum autorisé ( ) |
| | | planification du nombre maximum ( ) |
|
| Solstice DiskSuite |
| | coexistence avec VERITAS Volume Manager ( ) ( ) |
| | configuration ( ) |
| | ensembles de disques |
| | | ajout de lecteurs de disque ( ) |
| | | configuration ( ) |
| | | configuration du nombre maximum autorisé ( ) |
| | | création de partitions de disques ( ) |
| | fichier md.tab ( ) |
| | installation ( ) |
| | | à partir du CD-ROM de Solaris ( ) |
| | | au moyen de SunPlex Manager ( ) |
| | Journalisation de trans-métapériphériques |
| | | planification ( ) |
| | MANPATH ( ) |
| | médiateurs |
| | | ajout d'hôtes ( ) |
| | | correction des données incorrectes ( ) |
| | | présentation ( ) ( ) |
| | | vérification de l'état ( ) |
| | métapériphériques |
| | | activation ( ) |
| | | configuration du nombre maximum autorisé ( ) |
| | | planification du nombre maximum ( ) |
| | miroir |
| | | espace de noms global ( ) |
| | mise en miroir |
| | | disques racine ( ) |
| | | système de fichiers racine/) ( ) |
| | planification ( ) |
| | répliques de bases de données d'état ( ) |
|
| SSP |
| | Voir dispositifs d'accès par console | |
|
| Sun Management Center |
| | exécution ( ) |
| | exigences ( ) |
| | mise à niveau ( ) |
| | module Sun Cluster ( ) |
| | | aide en ligne ( ) |
| | | ajout de noeuds ( ) |
| | | chargement ( ) |
| | | installation ( ) |
| | | mise à niveau ( ) |
|
| SunPlex Manager ( ) |
| | ajout d'une autorisation RBAC ( ) |
| | configuration de nouveaux comptes utilisateur ( ) |
| | installation ( ) |
| | utilisation pour installer le logiciel ( ) |
|
| support technique ( ) |
|
| suppression de Sun Cluster ( ) |
|
| swap ( ) |
|
| System Service Processor (SSP) |
| | Voir dispositifs d'accès par console | |
|
| système DRL (Dirty Region Logging), planification ( ) |
|
| systèmes de fichiers de grappe |
| | configuration ( ) |
| | contrôle de la configuration ( ) |
| | message d'avertissement ( ) |
| | options de montage requises ( ) |
| | planification ( ) |
|
| systèmes de fichiers de la grappe, planification ( ) |
|
| systèmes de fichiers globaux |
| | Voir systèmes de fichiers de grappe | |
|
| systèmes de fichiers racine (/), mise en miroir ( ) |
| | | |
V |
|
| valeur du volume de la pile, correction après l'installation de VxFS ( ) |
|
| valeurs rpcmod, correction après l'installation de VxFS ( ) |
|
| /var/cluster/logs/install/scinstall.log.pid ( ) |
|
| variable kernel_cage_enable ( ) |
|
| variable local-mac-address? |
| | configuration ( ) |
| | exigences ( ) |
| | modification pendant la mise à niveau ( ) |
|
| vérification |
| | exigences en matière de préconfiguration ( ) |
| | mettre à niveau ( ) |
| | mode d'installation ( ) |
| | noms d'hôtes privés ( ) |
|
| VERITAS File System (VxFS) |
| | administration ( ) |
| | connexion |
| | | configuration ( ) |
| | installation ( ) |
| | journalisation |
| | | planification ( ) |
| | MANPATH ( ) |
| | montage des systèmes de fichiers de grappe ( ) |
| | montage des systèmes de fichiers de la grappe ( ) |
| | PATH ( ) |
|
| VERITAS Volume Manager (VxVM) |
| | annulation de l'encapsulage du disque racine ( ) |
| | annulation de l'encapsulage du disque root |
| | | message d'avertissement ( ) |
| | configuration |
| | | groupes de disques ( ) |
| | | noeuds non-VxVM ( ) ( ) |
| | | volumes ( ) |
| | Dynamic Multipathing (DMP) ( ) |
| | encapsulage ( ) |
| | Enclosure-Based Naming ( ) |
| | et Dynamic Multipathing (DMP) ( ) |
| | fonction de grappe ( ) |
| | groupe de disques racine (rootdg) |
| | | planification ( ) |
| | groupes de disques |
| | | enregistrement des groupes de disques ( ) |
| | groupes de disques racine (rootdg) |
| | | configuration de disques non racine disks ( ) |
| | groupes de disques root (rootdg) |
| | | planification ( ) |
| | groupes de périphériques de disques |
| | | affectation d'un nouveau code mineur ( ) |
| | | importation et déplacement ( ) |
| | installation ( ) |
| | | et encapsulage du disque root ( ) |
| | | VxVM uniquement ( ) |
| | MANPATH ( ) |
| | mise à niveau ( ) |
| | mise en miroir du disque root encapsulé ( ) |
| | PATH ( ) |
| | planification ( ) ( ) |
| | suppression des pages de manuel ( ) ( ) |
| | vérification de la configuration des groupes de disques ( ) |
|
| volumes |
| | Solaris Volume Manager |
| | | activation ( ) |
| | | configuration du nombre maximum autorisé ( ) |
| | | planification du nombre maximum ( ) |
| | VERITAS Volume Manager (VxVM) |
| | | configuration ( ) |
|
| VxFS |
| | Voir VERITAS File System (VxFS) | |
|
| vxio nombre de gestionnaires majeur |
| | configuration sur des noeuds non-VxVM ( ) ( ) |
| | configuration sur les noeuds VxVM installés ( ) ( ) |
|
| VxVM |
| | Voir VERITAS Volume Manager (VxVM) | |