| Skip Navigation Links | |
| Exit Print View | |
|
Sun Fire X4800 Server Diagnostics Guide Sun Fire X4800 Server Documentation |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Fire X4800 Server Diagnostics Guide Sun Fire X4800 Server Documentation |
About This Documentation (PDF and HTML)
Overview of the Diagnostics Guide
Introduction to System Diagnostics
How to Gather Service Visit Information
How to Troubleshoot Power Problems
How to Externally Inspect the Server
How to Internally Inspect the Server
Identifying DIMM Error Messages
Default BIOS Power-On Self-Test (POST) Events
Using the ILOM to Monitor the Host
Viewing the ILOM Sensor Readings
Viewing the ILOM System Event Log
Interpreting Event Log Time Stamps
How to Reset the ILOM SP Using the Web Interface
Creating a Data Collector Snapshot
How to Create a Snapshot With the ILOM Web Interface
How to Create a Snapshot With the ILOM Command-Line Interface
Using SunVTS Diagnostics Software
Introduction to SunVTS Diagnostic Test Suite
How to Diagnose Server Problems With the Bootable Diagnostics CD
Performing Pc-Check Diagnostic Tests
Before You Begin
To reset the SP, you need the Reset and Host Control (r) role enabled.
After updating the ILOM/BIOS firmware, you must reset the ILOM SP.
-> reset /SP
The ILOM reboots. The command line interface is unavailable while the ILOM reboots.
|