Go to main content

Sun Fire X4800 Server Product Notes

Exit Print View

» ...Documentation Home » Sun Fire X4800 Documentation Library » Sun Fire X4800 Server Product Notes » Hardware Issues » Supported Rack Mounting Configuration

Updated: September 2018

Sun Fire X4800 Server Product Notes

Document Information

Using This Documentation

Important Operating Notes

Supported Software and Firmware

Oracle x86 Products Accessibility

Hardware Issues

System Posts CPU Fault and Fails to Boot On System With Six Sun InfiniBand Dual Port 4x QDR PCIe Low Profile Host Channel Adapter M2 Cards (22536804)

Reset Takes a Long Time and Causes the Server to Power Cycle

Update SP Firmware After Replacing a CMOD or SP Module (15465497)

MegaCLI CfgEachDskRaid0 Command Does Not Work Correctly (CR 7121867)

DIMM Mismatch on Odd Numbered Pairs Results in DDR Training Failed on Entire Branch (CR7101624 and CR7111545)

If DIMM Failure Causes Branch Failure, Oracle ILOM Might Not Identify Them as Faulty (CR7099038 and CR7111543)

When Inserting a CMOD, Simultaneously Rotate Handles Until They Touch the Chassis

Video Output of CMM Is Distorted or Missing

SATA Drives Not Accessible Through NEM1 (CR 7003993)

Supported Rack Mounting Configuration

DIMM Population Rules

Locking Screws Secure Shelf Rails to Rear Mounting Brackets

Message About Missing Disks After Failed Boot (CR 6939507)

System Does Not Power Up After Power Cycling (CR 6950414)

System Does Not Recognize DIMM Due to SPD Corruption (CR 6946921)

Oracle Solaris 10 Operating System Issues

Oracle VM Issues

Windows Operating System Issues

Oracle ILOM Enhancements and Issues

Oracle Hardware Installation Assistant Issues

Language:

Supported Rack Mounting Configuration

You can install up to eight Sun Fire X4800 servers in a Sun Rack II 1042/1214 as long as your datacenter meets the cooling requirements to support these systems.

Copyright © 2017, 2018, Oracle and/or its affiliates. All rights reserved.