StorageTek 8 Gb FC PCI-Express HBA, Emulex Installation Guide For HBA Models SG-XPCIE1FC-EM8-Z, SG-PCIE1FC-EM8-Z, SG-XPCIE1FC-EM8-N, SG-PCIE1FC-EM8-N and SG-XPCIE2FC-EM8-Z, SG-PCIE2FC-EM8-Z, SG-XPCIE2FC-EM8-N, SG-PCIE2FC-EM8-N, 7105391

Diagnostic Support for All Other Supported Operating Systems

Diagnostic support for the HBA with all supported operating systems other than the Oracle Solaris OS is available through version 11.1.218.x, or newer, of the OneCommand Manager graphical user interface (GUI) or the OneCommand Manager command-line interface (CLI) utility. These utilities support the following functions:

• Production of useful firmware dump information, in the unlikely event of a failure (from the OneCommand Manager CLI only)

• Connectivity verification

• BIOS, FCode, EFI, and firmware version information

• Link status, including topology, data rate, and statistics

• Vital product data (VPD) information

• Attached devices list

• Option ROM, NVRAM update utilities

• Loopback test

• Read/Write Buffer test

To Install Diagnostic Support Utilities for a Supported OS Other Than the Oracle Solaris OS:

1. Go to the Emulex (now Broadcom) support site for Oracle at:

   https://www.broadcom.com/support/oem/oracle-fc/

2. Click the type of HBA, and then click the model number of the HBA for which you want to install diagnostic software.
3. In the Utilities section, click the diagnostic support utility for the OS that you want, and download the diagnostic utility to a local file system.
4. Install the diagnostic utility as described in the Emulex documentation, located on the Emulex (Broadcom) web site.