Go to main content
oracle home
StorageTek 8 Gb FC PCI-Express HBA, Emulex Installation Guide For HBA Models SG-XPCIE1FC-EM8-Z, SG-PCIE1FC-EM8-Z, SG-XPCIE1FC-EM8-N, SG-PCIE1FC-EM8-N and SG-XPCIE2FC-EM8-Z, SG-PCIE2FC-EM8-Z, SG-XPCIE2FC-EM8-N, SG-PCIE2FC-EM8-N, 7105391
Exit Print View
Search Term
Search Scope:
This Document
Entire Library
» ...
Documentation Home
»
StorageTek 8 Gb FC PCI-Express HBA, Emulex ...
»
StorageTek 8 Gb FC PCI-Express HBA, Emulex ...
»
Hardware Installation and Removal
»
Installing the Hardware
»
To Apply Power
Updated: Autgust 2018
StorageTek 8 Gb FC PCI-Express HBA, Emulex Installation Guide For HBA Models SG-XPCIE1FC-EM8-Z, SG-PCIE1FC-EM8-Z, SG-XPCIE1FC-EM8-N, SG-PCIE1FC-EM8-N and SG-XPCIE2FC-EM8-Z, SG-PCIE2FC-EM8-Z, SG-XPCIE2FC-EM8-N, SG-PCIE2FC-EM8-N, 7105391
Document Information
Using This Documentation
Product Documentation Library
Feedback
Chapter 1 HBA Overview
Kit Contents
HBA Features and Specifications
Operating System and Technology Requirements
System Interoperability
Host Platform Support
Storage Support
Array Support
Storage System Support
Tape Storage Support
Switch Support
Boot Support
Environmental Requirements
Chapter 2 Hardware Installation and Removal
Observing ESD and Handling Precautions
Best Practices for Installing the HBA
General Best Practices
Best Practices For Switches and Zoning
Best Practices For Booting From SAN (BFS) Configurations
Best Practices For Testing the Environment
Installing the Hardware
To Install the HBA
To Connect the Optical Cable
To Apply Power
(LED) Status
Testing the Installation
To Verify Proper Installation (Oracle Solaris)
To Verify Attached Storage (Oracle Solaris)
Replacing the SFP+ Unit on the HBA
Removing the Hardware
To Remove the Hardware
To Remove the HBA Hardware
Chapter 3 HBA Software Installation
Installing Utilities for Updating the BIOS and Firmware
To Install Utilities for Updating the BIOS or Firmware:
Installing Diagnostic Software
Diagnostic Support for the Oracle Solaris OS
Diagnostic Support for All Other Supported Operating Systems
To Install Diagnostic Support Utilities for a Supported OS Other Than the Oracle Solaris OS:
Using the OneCommand Manager CLI for Troubleshooting a Fatal Error
About Automatic Firmware Dumps
Installing Drivers
Installing Drivers for the Oracle Solaris OS
Installing Drivers for All Other Supported Operating Systems
Chapter 4 Known Issues
Reboot Fails on the SPARC Enterprise M8000 System
Language:
English
To Apply Power
Verify that the HBA is securely installed in the system.
Verify that the correct fiber-optic cable is attached.
Refer to your system installation or service manual to determine how to power on the system.
Previous
Next