StorageTek 8 Gb FC PCI-Express HBA, Emulex Installation Guide For HBA Models SG-XPCIE1FC-EM8-Z, SG-PCIE1FC-EM8-Z, SG-XPCIE1FC-EM8-N, SG-PCIE1FC-EM8-N and SG-XPCIE2FC-EM8-Z, SG-PCIE2FC-EM8-Z, SG-XPCIE2FC-EM8-N, SG-PCIE2FC-EM8-N, 7105391

To Remove the HBA Hardware

1. Use an ESD strap.
2. Refer to your system documentation to shut down, power off, and unplug the system.
3. Disconnect all cables.
4. Unscrew the case screws and remove the system case.
5. Remove the mounting bracket of the HBA from the system by unscrewing the panel screw or removing the clip, whichever is being used.

   You can now remove the HBA.