JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
StorageTek 4 Gb FC Dual Port ExpressModule HBA From Emulex

Installation Guide For HBA Models SG-XPCIE2FC-EB4-Z and SG-PCIE2FC-EB4-Z

search filter icon
search icon

Document Information

Preface

1.  HBA Overview

HBA Features and Specifications

System Interoperability

Host Platform Support

Storage System Support

Fibre Channel Switch Support

Operating System Requirements

2.  Hardware Installation and Removal

Observing ESD and Handling Precautions

Installing the Hardware

To Install the HBA

To Connect the Optical Cable

To Apply Power

Testing the Installation (Oracle Solaris)

To Verify Proper Installation (Oracle Solaris)

To Verify Attached Storage (Oracle Solaris)

Configuring the HBA for Hot-Plug Operation

Configuring the HBA for Hot-Plug Operation

Removing the Hardware

To Prepare the HBA for Removal Using the HBA Attention Button

To Prepare the HBA for Hot-Plug Removal (for Oracle Solaris)

To Remove the HBA Hardware

3.  HBA Software Installation

Driver Software for the Oracle Solaris OS

Oracle Solaris Diagnostic Support

Installing Software for the Red Hat and SUSE Linux OSs

To Install the HBA Software for Linux OS

Installing Software for Windows Server 2003

To Install the Software for Windows Server 2003

Configuration and Diagnostic Utilities

4.  Release Notes

Oracle Solaris 10 for x64/x86 Operating Systems

Red Hat Enterprise Linux 4 and SUSE Linux Enterprise Server 9 Systems

Windows Server 2003 Operating System

HBA Features and Specifications

The StorageTek 4 Gb FC Dual Port ExpressModule HBA (SG-XPCIE2FC-EB4-Z) consists of a single wide, ExpressModule bus expansion board that interfaces a 4-lane (8-lane physical) PCI-Express bus to a Fibre Channel (FC) optical media bus. The HBA can act as either an initiator or a target. The board supports two independent FC buses operating at 4.25 Gbits/sec. It is also backward compatible with 2.125-Gbit/sec and 1.0625-Gbit/sec devices.

See HBA Features and Specifications for a list of the HBA features.

Table 1-1 HBA Features and Specifications

Feature
Description
PCI connector
x8
PCI signaling environment
PCI Express x4 (4 active lanes)
PCI transfer rate (maximum)
PCI Express Generation One (2.5 Gbits/sec) x4
Number of FC buses
Two
Number of devices supported
126 devices per FC loop; 510 devices in Fabric mode
FC bus type (external)
Fiber optic media, short-wave, multi-mode fiber (400‐M5- SN-S)
FC transfer rate
400 MBps per port maximum, half duplex

800 MBps per port maximum, full-duplex

RAM
1.5 MB, parity protected, per port
BIOS ROM
One 4-MB flash ROM, field-programmable
NVRAM
One 2-KB EEPROM, field-programmable
External connectors
Two Small-Form Factor (SFF) multimode optic with LC-style connectors
Maximum FC cable length
1 Gbps: 500 meters using 50/125 mm core fiber

300 meters using 62.5/125 mm core fiber

2 Gbps: 300 meters using 50/125 mm core fiber

150 meters using 62.5/125 mm core fiber

4 Gbps: 150 meters using 50/125 mm core fiber

70 meters using 62.5/125 mm core fiber

LED indicators
Two LEDs per channel (yellow and green) on the front panel as status indicators

Power LED, Attention LED, and a push button on the front panel to support hot-swap functionality

Form Factor
PCI ExpressModule, single wide