| Skip Navigation Links | |
| Exit Print View | |
|
StorageTek 4 Gb FC Dual Port ExpressModule HBA From Emulex Installation Guide For HBA Models SG-XPCIE2FC-EB4-Z and SG-PCIE2FC-EB4-Z |
| Skip Navigation Links | |
| Exit Print View | |
|
|
StorageTek 4 Gb FC Dual Port ExpressModule HBA From Emulex Installation Guide For HBA Models SG-XPCIE2FC-EB4-Z and SG-PCIE2FC-EB4-Z |
HBA Features and Specifications
2. Hardware Installation and Removal
Observing ESD and Handling Precautions
Testing the Installation (Oracle Solaris)
To Verify Proper Installation (Oracle Solaris)
To Verify Attached Storage (Oracle Solaris)
Configuring the HBA for Hot-Plug Operation
Configuring the HBA for Hot-Plug Operation
To Prepare the HBA for Removal Using the HBA Attention Button
To Prepare the HBA for Hot-Plug Removal (for Oracle Solaris)
Driver Software for the Oracle Solaris OS
Oracle Solaris Diagnostic Support
Installing Software for the Red Hat and SUSE Linux OSs
To Install the HBA Software for Linux OS
Installing Software for Windows Server 2003
To Install the Software for Windows Server 2003
Oracle Solaris 10 for x64/x86 Operating Systems
Red Hat Enterprise Linux 4 and SUSE Linux Enterprise Server 9 Systems
Use the HBAnywhere Remote Management Utility or the lputil command-line interface (CLI) utility to configure the HBA. These utilities are available for Linux and Windows OS and provide support for the following functions:
Discover local and remote hosts, host bus adapters (HBAs), targets, and LUNs
Reset HBAs
Set HBA driver parameters
Update firmware
Enable or disable the system BIOS
Run diagnostic tests on HBAs
Manage out-of-band HBAs
Manage local and in-band remote HBAs
See the Linux or Windows OS Emulex user manual for more information about using the HBAnywhere and lputil utilities.
|