Skip Navigation Links | |
Exit Print View | |
![]() |
Sun Ethernet Fabric Operating System VLAN Administration Guide |
Configuring Static VLAN Entries
Retrieve the Configuration Details for all of the VLANs on a Switch
Retrieve the Configuration Details of a particular VLAN on the Switch
Configure a Static Unicast Entry
Configure a Static Multicast Entry
Configure Dynamic VLAN Learning
Configure Dynamic Multicast Learning
Configure Restricted VLAN Registration
Configure Restricted Group Registration
Configuring Service Classes and Expedited Traffic
Map a Priority to Traffic Class
Configure the Acceptable Frame Type
Configuring Static Unicast and Multicast Entries
Configure Static Unicast Entry in Topology 1
Configure Static Unicast Entry in Topology 2
Configure VLANs on the Nonroot Bridge
Configure Restricted VLAN Registration
If dot1q-tunneling is enabled on a port, you can enable BPDU tunneling on that port.
SEFOS# configure terminal SEFOS(config)# interface extreme-ethernet 0/15 SEFOS(config-if)# switchport mode access SEFOS(config-if)# switchport mode dot1q-tunnel SEFOS(config-if)# spanning-tree disable SEFOS(config-if)# l2protocol-tunnel stp
SEFOS# show l2protocol-tunnel COS for Encapsulated STP Packet : 7 Port Protocol Encapsulation Counter Decapsulation Counter ---- -------- --------------------- --------------------- Ex0/15 stp 0 0 Ex0/15 gvrp 0 0