Skip Navigation Links | |
Exit Print View | |
Sun Ethernet Fabric Operating System VLAN Administration Guide |
Configuring Static VLAN Entries
Retrieve the Configuration Details for all of the VLANs on a Switch
Retrieve the Configuration Details of a particular VLAN on the Switch
Configure a Static Unicast Entry
Configure a Static Multicast Entry
Configure Dynamic VLAN Learning
Configure Dynamic Multicast Learning
Configure Restricted VLAN Registration
Configure Restricted Group Registration
Configuring Service Classes and Expedited Traffic
Map a Priority to Traffic Class
Configure the Acceptable Frame Type
Configuring Static Unicast and Multicast Entries
Configure Static Unicast Entry in Topology 1
Configure Static Unicast Entry in Topology 2
Configure VLANs on the Nonroot Bridge
Configure Restricted VLAN Registration
Oracle’s SEFOS VLAN product facilitates grouping of devices on different physical LAN segments, which can communicate with each other as if they are all on the same physical LAN segment. An example grouping is a network of computers that behave as if they are connected to the same wire even though they might be physically located on different segments of a LAN. VLANs are configured through software rather than hardware, making them extremely flexible. This document describes the configuration of VLAN on a switch running SEFOS.