Skip Navigation Links | |
Exit Print View | |
Sun Ethernet Fabric Operating System VLAN Administration Guide |
Configuring Static VLAN Entries
Retrieve the Configuration Details for all of the VLANs on a Switch
Retrieve the Configuration Details of a particular VLAN on the Switch
Configure a Static Unicast Entry
Configure a Static Multicast Entry
Configure Dynamic VLAN Learning
Configure Dynamic Multicast Learning
Configure Restricted VLAN Registration
Configure Restricted Group Registration
Configuring Service Classes and Expedited Traffic
Configure the Acceptable Frame Type
Configuring Static Unicast and Multicast Entries
Configure Static Unicast Entry in Topology 1
Configure Static Unicast Entry in Topology 2
Configure VLANs on the Nonroot Bridge
Configure Restricted VLAN Registration
You can map a priority to a traffic class on the specified port (0/2 in this example). The frame received on the interface with the configured priority is processed in the configured traffic class.
SEFOS# show vlan traffic-classes port extreme-ethernet 0/2 Traffic Class table --------------------- Port Priority Traffic Class ----- --------- ------------- Ex0/2 1 0 Ex0/2 2 1 Ex0/2 3 3 Ex0/2 4 4 Ex0/2 5 5 Ex0/2 6 6 Ex0/2 7 7
SEFOS# configure terminal SEFOS(config)# interface extreme-ethernet 0/2 SEFOS(config-if)# vlan map-priority 7 traffic-class 1 SEFOS(config-if)# end SEFOS(config)# exit
SEFOS# show vlan traffic-classes port extreme-ethernet 0/2 Traffic Class table --------------------- Port Priority Traffic Class ----- --------- ------------- Ex0/2 1 0 Ex0/2 2 1 Ex0/2 3 3 Ex0/2 4 4 Ex0/2 5 5 Ex0/2 6 6 Ex0/2 7 1