Skip Navigation Links | |
Exit Print View | |
Sun Ethernet Fabric Operating System VLAN Administration Guide |
Configuring Static VLAN Entries
Retrieve the Configuration Details for all of the VLANs on a Switch
Retrieve the Configuration Details of a particular VLAN on the Switch
Configure a Static Unicast Entry
Configure a Static Multicast Entry
Configure Dynamic VLAN Learning
Configure Dynamic Multicast Learning
Configure Restricted VLAN Registration
Configure Restricted Group Registration
Map a Priority to Traffic Class
Configure the Acceptable Frame Type
Configuring Static Unicast and Multicast Entries
Configure Static Unicast Entry in Topology 1
Configure Static Unicast Entry in Topology 2
Configure VLANs on the Nonroot Bridge
Configure Restricted VLAN Registration
SEFOS VLAN supports multiple traffic classes to handle expedited traffic. Each traffic class is assigned a traffic type based on the time sensitivity of the traffic. The aim is to meet the latency and throughput requirements of time-critical traffic in a LAN environment where both time-critical and non time-critical traffic compete for the network bandwidth.
Each priority-tagged data frame that is received carries priority information. This information is used to map the traffic to one of the supported traffic classes for a given outbound port. Based on the selected traffic class, the frame is scheduled for outbound transmission.