Install DIMMs

Before You Begin

• DIMM Population Rules and Guidelines

• Remove DIMMs.

1. Prepare the server module for service.

   See Preparing for Service .

2. Unpack the replacement DIMMs and place them on an anti static mat.
3. Ensure that the connector slot ejector tabs are in the open position.
4. Align the replacement DIMM with the connector.

   Align the DIMM notch with the key in the connector. This ensures that the DIMM is oriented correctly.

   
   
5. Push the DIMM into the slot until the ejector tabs lift and lock the DIMM in place.

   ---

   Caution - Component damage. If the DIMM does not easily seat into the connector, verify correct orientation. If the orientation is reversed, damage to the DIMM or DIMM slot might occur.

   ---

6. Clear any DIMM-related faults and verify DIMM component information.

   Use the Oracle ILOM web interface or CLI to view DIMM component information.

   Refer to the Oracle Integrated Lights Out Manager (ILOM) 3.1 Documentation Collection

Next Steps

• Return the Server Module to Operation.