Insert Storage Drive Filler Panels

1. Locate the vacant storage drive module slot in the server module.
2. Ensure that the release lever on the filler panel is fully opened.
3. Slide a standard storage drive filler panel into the vacant storage drive slot until the release lever engages with the chassis [1].

   The release lever starts to close as it makes contact with the chassis. Do not slide the filler panel in all the way. Leave the filler panel out approximately 0.25 to 0.50 inch (6 to 12 mm) from the opening.

4. Close the release lever until it clicks into place and is flush with the front of the server [2].