Access Text Menu Interface in ddcli Utility

To access the ddcli utility in text menu mode:

1. Start the ddcli utility in text menu mode by typing the ddcli command command without any options: ddcli

   The ddcli utility displays the following top-level menu, showing a list of cards in the system. Four Sun Flash Accelerator F80 PCIe Cards are shown in the following example:

   ID    WarpDrive     Package Version    PCI Address
   --    ---------     ---------------    -----------
   1     ELP-4x200-4d-n    09.05.24.00        00:02:00:00
   2     ELP-4x200-4d-n    09.05.24.00        00:03:00:00
   3     ELP-4x200-4d-n    09.05.24.00        00:04:00:00
   4     ELP-4x200-4d-n    09.05.24.00        00:05:00:00
   
   Select the WarpDrive [1-4 or 0:Quit]

2. Select a Sun Flash Accelerator F80 PCIe Card ID 1 to 4 (ELP).
3. After you select one of the cards in the top-level menu, the ddcli utility displays the following menu:

   1.    List WarpDrive Information
   2.    Update Flash Package
   3.    Display WarpDrive Health
   4.    Locate WarpDrive
   5.    Format WarpDrive
   6.    Show Vital Product Data
   7.    Extract SMART Logs
   
   Select Operation [1-7 or 0:Quit]:

4. Select the operation [1-7 or 0:Quit]:

Related Information

• Access Command Line Interface (CLI) in ddcli Utility