The -showvpd command is used to display the VPD information on the selected Sun Flash Accelerator F80 PCIe Card.
The VPD (Vital Product Data) definitions are:
|
Text Menu Interface Usage: The following top-level menu lists the cards in the system and prompts you to select a card on which to perform an operation. Four Sun Flash Accelerator F80 PCIe Cards are shown in the following example:
# ddcli ID WarpDrive Package Version PCI Address -- --------- --------------- ----------- 1 ELP-4x200-4d-n 09.05.24.00 00:02:00:00 2 ELP-4x200-4d-n 09.05.24.00 00:03:00:00 3 ELP-4x200-4d-n 09.05.24.00 00:04:00:00 4 ELP-4x200-4d-n 09.05.24.00 00:05:00:00 Select the WarpDrive [1-4 or 0:Quit]: 1 1. List WarpDrive Information 2. Update Flash Package 3. Display WarpDrive Health 4. Locate WarpDrive 5. Format WarpDrive 6. Show Vital Product Data 7. Extract SMART Logs Select Operation [1-7 or 0:Quit]: 6
Command Line Interface Usage: Enter the following line of text in the CLI to run the -showvpd command: ddcli -c 1 -showvpd.
Sample Output: When the -showvpd command runs, the ddcli utility outputs the following text.
# ddcli -showvpd ----------------------------------------------------------- VPD Information ----------------------------------------------------------- Product Name : Sun Flash Accelerator F80 PCIe 2.0 Low Profile Adapter PN : 7069200 EC : 03-25598-00D SN : 000000P+9999999999 VA : Flash HBA VB : 0000 V1 : LSI Corporation V2 : 1000 V3 : 007E V4 : 108E V5 : 050A V6 : 17.6W V7 : 5.8W V8 : 0.1W MN : 10080 RV : 0x6a V1 : SP33333333 V3 : 04 V4 : 91 V6 : V6 V7 : P -----------------------------------------------------------