The -locate command initates green blinking of the Status LED on the selected Sun Flash Accelerator F80 PCIe Card. Use this command to locate a selected card in a rack of servers. The Status LED returns to an operating status indicator after 60 seconds.
Text Menu Interface Usage: The following top-level menu lists the cards in the system and prompts you to select a card on which to perform an operation. Four Sun Flash Accelerator F80 PCIe Cards are shown in the following example:
# ddcli ID WarpDrive Package Version PCI Address -- --------- --------------- ----------- 1 ELP-4x200-4d-n 09.05.24.00 00:02:00:00 2 ELP-4x200-4d-n 09.05.24.00 00:03:00:00 3 ELP-4x200-4d-n 09.05.24.00 00:04:00:00 4 ELP-4x200-4d-n 09.05.24.00 00:05:00:00 Select the WarpDrive [1-4 or 0:Quit]: 1 1. List WarpDrive Information 2. Update Flash Package 3. Display WarpDrive Health 4. Locate WarpDrive 5. Format WarpDrive 6. Show Vital Product Data 7. Extract SMART Logs Select Operation [1-7 or 0:Quit]: 4 Enter Operation [1:on]:
Command Line Interface Usage: Enter the following line of text in the CLI to run the -locate command: ddcli -c 1 -locate on