Index
A
- adding
- links to an external bridge
Adding Links to an Existing Bridge
- links to an external bridge
- administering VLANs on bridged networksAdministering VLANs on Bridged Networks
- aggregations Seelink aggregations
- application priority configurationsApplication Priority Configurations
- application TLV units
- assigning a PVLAN to a zoneAssigning a PVLAN to a Zone
- auto-enable-agentsEnabling LLDP on the System
B
- basic-tlvOptional TLV Units for an LLDP Agent
- bridged network ringBridged Network Ring
- bridged networks
- adding links to an existing bridgeAdding Links to an Existing Bridge
- administering VLANs on bridgesAdministering VLANs on Bridged Networks
- bridged network ringBridged Network Ring
- creating a bridgeCreating a Bridge
- debugging bridgesDebugging Bridges
- deleting a bridgeDeleting a Bridge From the System
- displaying configuration informationDisplaying Bridge Configuration Information
- displaying configuration information about bridge linksDisplaying Configuration Information About Bridge Links
- example of creating a bridgeCreating a Bridge
- example of deleting a bridge from the systemDeleting a Bridge From the System
- example of displaying bridge informationDisplaying Bridge Information
- example of modifying the protection type for a bridgeModifying the Protection Type for a Bridge
- how a bridge network worksHow a Bridged Network Works
- modifying the protection typeModifying the Protection Type for a Bridge
- overviewOverview of Bridged Networks
- protocolsBridging Protocols
- removing linksRemoving Links From a Bridge
- setting link propertiesSetting Link Properties for a Bridge
- simple bridged networkSimple Bridged Network
- STP daemonSTP Daemon
- TRILL daemonTRILL Daemon
- VLANs and STP and TRILL protocolsVLANs and the STP and TRILL Protocols
- adding links to an existing bridge
- bridges
- adding links to an existing bridgeAdding Links to an Existing Bridge
- configuring a VLAN over a link that is part of a bridgeHow to Configure VLANs Over a Datalink That Is Part of a Bridge
- creatingCreating a Bridge
- naming bridgesCreating a Bridge
- removing links fromRemoving Links From a Bridge
- adding links to an existing bridge
- bridging protocolsBridging Protocols
C
- class of service SeeCoS
- community VLANOverview of Private VLANs
- configuring
- CoS
- priority definitionsOverview of Data Center Bridging
- priority definitions
- creating
- bridgesCreating a Bridge
- link aggregationsCreating a Link Aggregation
- VLAN over a link that is part of a bridgeHow to Configure VLANs Over a Datalink That Is Part of a Bridge
- VLANs on legacy deviceHow to Configure VLANs on a Legacy Device
- VLANs over a link aggregationHow to Configure VLANs Over a Link Aggregation
- bridges
- customizing
D
- datalink multipathing aggregations SeeDLMP aggregations
- DCBData Center Bridging
- configuring ETSCustomizing Enhanced Transmission Selection for DCB
- considerationsConsiderations When Using DCB
- cos propertyOverview of Data Center Bridging
- customizing PFCCustomizing Priority-Based Flow Control for DCB
- enhanced transmission selection (ETS)Overview of Data Center Bridging
- overviewOverview of Data Center Bridging
- priority-based flow control (PFC)
- configuring ETS
- DCBX protocol
- defining
- LLDP TLVHow to Define TLV Units
- LLDP TLV
- deleting
- VLANsDeleting a VLAN
- VLANs
- disabling
- LLDPDisabling LLDP
- LLDP
- displaying
- aggregated port informationDisplaying Detailed Information About the Aggregated Port
- bridge configuration informationDisplaying Bridge Configuration Information
- datalink properties
- ETS configuration informationDisplaying ETS Configuration Information
- IP address state of aggregationDisplaying the IP Address and the State of the Aggregation
- LLDP advertised informationDisplaying the Advertised Information
- LLDP statisticsDisplaying LLDP Statistics
- PFC configuration informationDisplaying PFC Configuration Information
- PFC mapping informationDisplaying PFC Mapping Information Between Host and Peer
- PFC synchronization statusDisplaying the Capability of the Local Host to Synchronize PFC Information
- priority definitionsDisplaying Priority Definitions
- probe-ip property valuesDisplaying probe-ip Property Values
- probe-related informationDisplaying Probe-Related Information
- state of the aggregated portDisplaying the State of the Aggregated Ports
- synchronization statusDisplaying the Capability of the Local Host to Synchronize ETS Information
- VLAN informationDisplaying VLAN Information
- aggregated port information
- dladm command
- add-bridgeAdding Links to an Existing Bridge
- create-aggrHow to Create a Link Aggregation
- create-bridgeCreating a Bridge
- delete-aggrHow to Delete a Link Aggregation
- delete-bridgeDeleting a Bridge From the System
- delete-vlan
- modify-aggrModifying a Trunk Aggregation
- modify-bridgeModifying the Protection Type for a Bridge
- modify-vlan
- remove-bridgeRemoving Links From a Bridge
- show-aggrHow to Create a Link Aggregation
- show-linkpropDisplaying PFC Configuration Information
- show-vlanDisplaying VLAN Information
- add-bridge
- DLMP aggregationsDatalink Multipathing Aggregations
- advantagesAdvantages of DLMP Aggregation
- configuring probe-based failure detectionHow to Configure Probe-Based Failure Detection for DLMP
- example of configuring probe-based failure detectionConfiguring Probe-Based Failure Detection
- example of creating DLMP aggregationCreating a DLMP Aggregation and Configuring an IP Interface on Top of the
Aggregation
- failure detectionFailure Detection in DLMP Aggregation
- how DLMP aggregation worksHow DLMP Aggregation Works
- link-based failure detectionLink-Based Failure Detection
- monitoring probe-based failure detectionMonitoring Probe-Based Failure Detection
- port failureDLMP Aggregation When a Port Fails
- probe-based failure detectionProbe-Based Failure Detection
- switching to trunk aggregationsHow to Switch Between Link Aggregation Types
- topologyHow DLMP Aggregation Works
- advantages
E
- enabling
- LLDP for specific portsHow to Enable LLDP for Specific Ports
- LLDP globallyHow to Enable LLDP Globally
- synchronization of PFC informationEnabling Synchronization Between the Host and the Peer
- LLDP for specific ports
- ETS
- bandwidth shareSetting the ETS-Related Datalink Properties
- displaying informationDisplaying ETS Configuration Information
- ETS TLV unitsSetting ETS TLV Units
- example of displaying ETS-related datalink propertiesDisplaying ETS-Related Datalink Properties
- example of displaying the capability to synchronize ETS informationDisplaying the Capability of the Local Host to Synchronize ETS Information
- example of recommending ETS configuration to the peerRecommending an ETS Configuration to the Peer
- local and remote informationSetting the ETS-Related Datalink Properties
- recommending ETS configuration to the peerRecommending ETS Configuration to the Peer
- setting ETS-related datalink propertiesSetting the ETS-Related Datalink Properties
- bandwidth share
- examples
- creating a VLANCreating a VLAN
- creating a VLAN with zones
- creating multiple VLANs over a link aggregationConfiguring Multiple VLANs Over a Link Aggregation
- deleting a VLAN configuration
- migrating multiple VLANsSelective Migration
- creating a VLAN
F
- failure detection in DLMP aggregationFailure Detection in DLMP Aggregation
- link-based failure detectionLink-Based Failure Detection
- probe-based failure detectionProbe-Based Failure Detection
- link-based failure detection
G
- global TLV unitsGlobal TLV Units and Their Properties
H
- high-availability
- DLMP aggregationsDatalink Multipathing Aggregations
- DLMP aggregations
I
- ICMP probingProbe-Based Failure Detection
- installing
- LLDP packageHow to Install the LLDP Package
- LLDP package
- IPMP
- link aggregations, comparison withLink Aggregations and IPMP: Feature Comparison
- link aggregations, comparison with
- isolated VLANOverview of Private VLANs
L
- LACP
- using a switch withUsing a Switch With the Link Aggregation Control Protocol
- using a switch with
- link aggregation
- example of adding a link to an aggregationAdding a Link to an Aggregation
- example of deleting a link aggregationDeleting a Link Aggregation
- example of adding a link to an aggregation
- Link Aggregation Control Protocol (LACP) SeeLACP
- link aggregationsLink Aggregations
- adding datalinksHow to Add a Link to an Aggregation
- benefitsBenefits of Link Aggregation
- combined use with VLANsUse Case: Combining Link Aggregations and VLAN Configurations
- creatingHow to Create a Link Aggregation
- deletingHow to Delete a Link Aggregation
- deployment possibilitiesDeploying Link Aggregation Configurations
- DLMP aggregationsDatalink Multipathing Aggregations
- example of removing a link from an aggregationRemoving a Link From an Aggregation
- feature comparison of trunk and DLMP aggregationsComparing Trunk and DLMP Aggregation
- featuresBenefits of Link Aggregation
- IPMP, comparison withLink Aggregations and IPMP: Feature Comparison
- overviewOverview of Link Aggregations
- requirementsRequirements for Link Aggregations
- switching between DLMP and trunk aggregationsHow to Switch Between Link Aggregation Types
- trunk aggregationsTrunk Aggregations
- adding datalinks
- Link Layer Discovery Protocol SeeLLDP
- link layer discovery protocol SeeLLDP
- link properties
- setting for a bridgeSetting Link Properties for a Bridge
- setting for a bridge
- link state notificationRequirements for Link Aggregations
- link-based failure detectionLink-Based Failure Detection
- LLDP
- agent modesLLDP Agent Modes
- auto-enable-agentsEnabling LLDP on the System
- components in Oracle SolarisComponents of an LLDP Implementation
- defining TLV valuesHow to Define TLV Units
- disablingDisabling LLDP
- displaying advertised informationDisplaying the Advertised Information
- displaying statisticsDisplaying LLDP Statistics
- enablingEnabling LLDP on the System
- enabling for specific portsHow to Enable LLDP for Specific Ports
- enabling globallyHow to Enable LLDP Globally
- example of adding optional TLV unitsAdding Optional TLV Units to an LLDP Packet
- example of customizing the auto-enable-agents SMF propertyCustomizing the auto-enable-agents SMF Property
- example of defining TLV valuesDefining TLV Values for the syscapab and mgmtaddr TLV
Units
- example of displaying advertised informationDisplaying Advertised LLDP Agent Information
- example of displaying selected statisticsDisplaying Selected LLDP Packet Statistics
- example of displaying statisticsDisplaying LLDP Packet Statistics
- example of displaying the chassis ID and port IDDisplaying the Chassis ID and Port ID
- example of enabling LLDP on multiple datalinksEnabling LLDP on Multiple Datalinks
- global TLV units
- installingHow to Install the LLDP Package
- lldpd daemonComponents of an LLDP Implementation
- management information base (MIB)Information Sources of the LLDP Agent
- monitoring agentsMonitoring LLDP Agents
- optional TLV unitsOptional TLV Units
- per-agent TLV units
- SMF property forEnabling LLDP on the System
- specifying agent TLV unitsHow to Specify TLV Units for the LLDP Packet of an Agent
- agent modes
- LLDP SMF serviceComponents of an LLDP Implementation
- lldpadm commandComponents of an LLDP Implementation
- reset-agentpropDisabling LLDP
- set-agentprop
- set-agenttlvprop
- show-agenttlvprop
- show-tlvpropHow to Define TLV Units
- reset-agentprop
- load balancing
- trunk aggregationsDefining Aggregation Policies for Load Balancing
- trunk aggregations
M
- management information base (MIB)Information Sources of the LLDP Agent
- managing network datalinks
- bridged networksBridged Networks
- features and componentsFeatures and Components That Are Used to Manage Network Datalinks
- introductionIntroduction to Managing Network Datalinks
- link aggregationsLink Aggregations
- bridged networks
- mandatory TLV unitsInformation the LLDP Agent Advertises
- migrating
- mode of operation for DCB
- modifying
- protection type of a bridgeModifying the Protection Type for a Bridge
- trunk aggregationModifying a Trunk Aggregation
- VLAN ID of a VLANModifying the VLAN ID of a VLAN
- protection type of a bridge
- monitoring
- LLDP agentsMonitoring LLDP Agents
- LLDP agents
N
- network stack
- bridge implementationHow Oracle Solaris Bridges Are Implemented in the Network Stack
- bridge implementation
O
- optional TLV unitsOptional TLV Units
P
- PAUSE framesPriority-Based Flow Control
- per-agent TLV unitsPer-Agent TLV Units and Their Properties
- PFC
- CoS priority mappingsSetting the PFC-Related Datalink Properties
- customizing PFC for DCBHow to Customize Priority-Based Flow Control for DCB
- datalink properties, relatedSetting the PFC-Related Datalink Properties
- displaying datalink propertiesDisplaying Datalink Properties
- displaying informationDisplaying PFC Configuration Information
- example of displaying capability to synchronize PFC informationDisplaying the Capability of the Local Host to Synchronize PFC Information
- example of displaying CoS priority definitionsDisplaying CoS Priority Definitions
- example of displaying PFC-related datalink propertiesDisplaying PFC-Related Datalink Properties
- example of enabling synchronization between host and the peerEnabling Synchronization Between the Host and the Peer
- example of verifying symmetry of PFC informationVerifying Symmetry of PFC Information Between Host and Peer
- local and remote informationSetting the PFC-Related Datalink Properties
- PAUSE framesPriority-Based Flow Control
- synchronized informationSetting the PFC-Related Datalink Properties
- VNIC clientsDisplaying CoS Priority Definitions
- CoS priority mappings
- PFC mappingPriority-Based Flow Control
- PFC TLV unitsSetting the PFC TLV Units
- private virtual local area networkConfiguring Private Virtual Local Area Networks
- private VLAN
- configuringConfiguring a Private VLAN
- deletingDeleting a Private VLAN
- modifyingModifying Private VLANs
- configuring
- private VLANsConfiguring Private Virtual Local Area Networks
- probe-based failure detectionProbe-Based Failure Detection
- displaying aggregated port informationDisplaying Detailed Information About the Aggregated Port
- displaying probe-ip property valuesDisplaying probe-ip Property Values
- displaying probe-related informationDisplaying Probe-Related Information
- displaying the IP address state of aggregationDisplaying the IP Address and the State of the Aggregation
- displaying the state of the aggregated portDisplaying the State of the Aggregated Ports
- example of configuring probe-based failure detectionConfiguring Probe-Based Failure Detection
- ICMP probingProbe-Based Failure Detection
- monitoringMonitoring Probe-Based Failure Detection
- transitive probingProbe-Based Failure Detection
- displaying aggregated port information
- promiscuous trunk portPVLAN Ports
- protocol data units (PDUs)Information Sources of the LLDP Agent
- protocols
- PVLAN
- advantagesAdvantages of Using PVLANs
- assigning to a zoneAssigning a PVLAN to a Zone
- community VLANOverview of Private VLANs
- configuration requirementsPVLAN Configuration Requirements
- configuringConfiguring a Private VLAN
- deletingDeleting a Private VLAN
- isolated VLANOverview of Private VLANs
- modifyingModifying Private VLANs
- overviewOverview of Private VLANs
- portsPVLAN Ports
- promiscuous trunk portPVLAN Ports
- secondary trunk portPVLAN Ports
- with zonePVLANs With Zones
- advantages
- PVLAN portsPVLAN Ports
- PVLAN secondary trunk portPVLAN Ports
R
- recommending
- ETS configuration to the peerRecommending ETS Configuration to the Peer
- ETS configuration to the peer
- remote MIBInformation Sources of the LLDP Agent
- removing
- link from an aggregationRemoving a Link From an Aggregation
- links from a bridgeRemoving Links From a Bridge
- link from an aggregation
S
- setting
- ETS TLV unitsSetting ETS TLV Units
- ETS-related datalink propertiesSetting the ETS-Related Datalink Properties
- mode of operation for DCBSetting the Mode of Operation for DCB
- PFC TLV unitsSetting the PFC TLV Units
- PFC-related datalink propertiesSetting the PFC-Related Datalink Properties
- ETS TLV units
- simple bridged networkSimple Bridged Network
- specifying
- TLV units for LLDP packet of an agentHow to Specify TLV Units for the LLDP Packet of an Agent
- TLV units for LLDP packet of an agent
- STP
- setting as bridge protection typeModifying the Protection Type for a Bridge
- setting as bridge protection type
- STP daemonSTP Daemon
- STP protocolBridging Protocols
- contrasted with TRILLBridging Protocols
- contrasted with TRILL
- switching between DLMP and trunk aggregationsSwitching Between Trunk and DLMP Aggregations
T
- tag modeSetting the Tag Mode for a PVLAN
- TLV property
- willingSetting the PFC TLV Units
- willing
- topology discovery
- with LLDPOverview of LLDP
- with LLDP
- transitive probingProbe-Based Failure Detection
- TRILLBridging Protocols
- setting as bridge protection typeModifying the Protection Type for a Bridge
- setting as bridge protection type
- TRILL daemonTRILL Daemon
- TRILL protocol
- contrasted with STPBridging Protocols
- contrasted with STP
- trunk aggregationsTrunk Aggregations
- back-to-backBack-to-Back Trunk Aggregation Configuration
- example of creating trunk aggregationCreating a Trunk Aggregation
- example of modifying a trunk aggregationModifying a Trunk Aggregation
- Link Aggregation Control Protocol (LACP)Using a Switch With the Link Aggregation Control Protocol
- load balancing policyDefining Aggregation Policies for Load Balancing
- modifyingModifying a Trunk Aggregation
- prerequisitesHow to Create a Link Aggregation
- switching to DLMP aggregationsHow to Switch Between Link Aggregation Types
- unique featuresTrunk Aggregations
- using a switchTrunk Aggregation Using a Switch
- when to useTrunk Aggregations
- back-to-back
- type -length-value (TLV) unitsInformation the LLDP Agent Advertises
V
- VLANs
- combined use with link aggregationsUse Case: Combining Link Aggregations and VLAN Configurations
- configurationHow to Configure a VLAN
- creating over link aggregationsHow to Configure VLANs Over a Link Aggregation
- deletingDeleting a VLAN
- displaying informationDisplaying VLAN Information
- example to create a VLANCreating a VLAN
- example to create a VLAN with zones
- example to create multiple VLANs over a link aggregationConfiguring Multiple VLANs Over a Link Aggregation
- example to delete a VLAN configuration
- legacy devices, onHow to Configure VLANs on a Legacy Device
- MAC addresses onMigrating a VLAN to Another Underlying Link
- migratingModifying VLANs
- modifying VLAN IDsModifying VLANs
- overviewOverview of Deploying VLANs
- planning a VLAN configurationPlanning a VLAN Configuration
- STP and TRILL protocolsVLANs and the STP and TRILL Protocols
- topologiesVLAN Topology
- used with zonesUsing VLANs With Virtualization
- VLAN namesAssigning VLAN Names
- when to use VLANsWhen to Use VLANs
- workgroupsWhen to Use VLANs
- combined use with link aggregations
W
- what's new
- private virtual local area networksWhat's New in Managing Network Datalinks in Oracle Solaris 11.3
- private virtual local area networks