Stabilize the Rack for Installation
| Caution -
To reduce
the risk of personal injury, stabilize the rack cabinet, and extend
all anti-tilt devices before installing the controller.
|
Refer to your rack documentation for detailed instructions for the following
steps.
-
Open and remove the front and rear doors from the rack cabinet.
Note -
The front and rear doors need to be removed only if they impinge on the
mounting bay.
-
To prevent the rack cabinet from tipping during the installation, fully extend
the rack cabinet's anti-tilt legs or anti-tilt bar, which are located at the
bottom front of the rack cabinet.
-
If there are leveling feet beneath the rack cabinet to prevent it from
rolling, extend these leveling feet fully downward to the floor.