Table of Contents

• Title and Copyright Information
• My Oracle Support (MOS)
• What's New in This Guide
• 1 Introduction
  • Purpose and Scope
  • References
  • Software Release Numbering
  • Database Version Number
  • Acronyms and Terminology
  • Recommendations
• 2 General Description
• 3 Upgrade Overview
  • Required Materials
  • Upgrade Preparation Overview
  • Pre-Upgrade Overview
  • Upgrade Execution Overview
  • Backout Procedure Overview
• 4 Upgrade Preparation
  • Hardware Upgrade Preparation
  • Software Upgrade Preparation
• 5 Software Upgrade Procedure
  • Software Upgrade Execution – Session 1
    • Verifying Pre-Upgrade Requirements and Capturing Upgrade Data
    • Backing Up the Database
    • Updating the Source-Release Spare Fixed Disk
    • Verifying All Databases
    • Initializing MASPs to Run on Target-Release GPLs
    • Verifying the Target Release and Software Access Key
  • OAM Conversion
    • Verifying all Databases
    • STP Conversion
  • Completion of Session 1
    • Migrate to VxWorks6.9
      • Migrate the MASP Cards Running VxWorks 6.4 GPL to VxWorks 6.9 GPL
      • Migrate the MCPM Cards Running VxWorks 6.4 GPL to VxWorks 6.9 GPL
      • MCP Application is Provisioned on SLIC Card, Migrate the Same to VxWorks6.9
      • Migrate the IPS (ENET-B) Cards Running VxWorks 6.4 GPL to VxWorks 6.9 GPL
      • IPS Application is Provisioned on SLIC Card, Migrate the Same to VxWorks6.9
      • Completing Upgrade/Return to Full-Function Mode
      • Backing Up Converted Database
  • Upgrade Session 2
    • Verifying Upgrade Session 2 Requirements
    • Upgrading Removable Medias
    • Backing Up Fixed Disk
    • Migrate the ATMITU or ATMANSI (E5-ATM-B) Cards Running VxWorks 6.4 GPL to VxWorks 6.9 GPL
    • Migrate the E5-E1T1-B Cards Running VxWorks 6.4 GPL to VxWorks 6.9 GPL
    • CCS7ITU or SS7ANSI Application is Provisioned on SLIC Card, Migrate the Same to VxWorks6.9
    • Upgrading Spare MASPs
    • Upgrading Spare HIPR2 Cards
    • Verifying All Databases
    • Session 2 Completion
• 6 Recovery Procedures
  • Backout Setup Procedures
  • Revert MASP, MCPM and IPSM to VxWorks6.4
    • Revert IPS (ENET-B) cards on VxWorks6.4
    • Revert IPSM Application Running on SLIC to VxWorks6.4
    • Revert MCPM Cards on VxWorks6.4
    • Revert MCPM Application Running on SLIC card to VxWorks6.4
    • Revert the MASP Card to VxWorks6.4
  • Recovery Procedure A
  • Recovery Procedure B
    • Full Fallback Using Spare E5-MASP
    • Full Fallback Using Fixed Disk As OAM Conversion Workspace – Case 1
    • Full Fallback Using Fixed Disk As OAM Conversion Workspace – Case 2
    • Full Fallback Using Fixed Disk As OAM Conversion Workspace – Case 3
  • Recovery Procedure C
    • Fall Back Procedure for Network Cards
    • Restoring Flash-Based Service Cards
    • Restoring Flash-Based Link Cards
    • Restoring Mux Cards
• A Upgrading Flash-Based GPL on Non-In-Service and Unprovisioned Network Cards
• B Preparations For Upgrade Execution
  • Target Release Software Download
    • Download Target Software Release and Create USB Upgrade Media
    • Download Target Release to Inactive Partition
  • Configuring Card-Set Network Conversion Method
• C Entering Upgrade Software Access Key
• D Supplemental Information For Procedure 8, Step 2
  • Samples of Message from Convertstp Action for Act-Upgrade Command
  • Determination and Recovery of DDL Hunt During Upgrade
• E EEDB Installation
  • Upgrade Overview
    • Required Materials
    • Installation Phases
    • Upgrade Preparation
      • Setting Up the Upgrade Environment for EEDB
      • Verify the Pre-Upgrade Requirements
    • Software Installation Procedures
      • Create Configuration File on Node A
      • Create Configuration File on Node B
      • Pre-Install Configuration on Node A
      • Pre-Install Configuration on Node B
      • Install Application on Node A
      • Install Application on Node B
    • Generic Procedure
      • ISO Image download from Oracle Software Delivery Cloud
      • Validate Upgrade Media
      • IPM MPS Server with TPD 7.6.X
      • Perform System Health Check
      • Configure Network Interface Using platcfg Utility
      • Copy ISO image in USB
• F Upgrading Source Release 46.5.1.10.0 to Target Release 46.5.1.20.0 (46.9.1.20.0)
• G Customer Sign Off