Table of Contents
- Title and Copyright Information
- Using This Documentation
- 1 Oracle Server CLI Tools Overview
- 2 Host-to-ILOM Interconnect
- 3 CLI Tools Command Syntax and Conventions
- 4 Using biosconfig to Update the BIOS
-
5
Using fwupdate to Update
Firmware
-
fwupdate Command Overview
- fwupdate Features
- fwupdate Command Prerequisites
- Secure Boot Setting Can Affect fwupdate Commands on Intel-Based Network and Storage Controllers
- Linux MMIO Access Settings Can Affect fwupdate Commands On Intel Network Controllers
- Downloading Firmware Patches
- fwupdate and Service Processor Access
- fwupdate Command Syntax
- Listing Component Firmware Information
- Updating Component Firmware
- Reset a Device After a Firmware Update
- Execution Summary
-
fwupdate Command Overview
- 6 Using hwmgmtcli to Display Hardware Information
-
7
Using ilomconfig to Configure Oracle
ILOM
- ilomconfig Command Overview
- Importing and Exporting XML Configurations
- Listing System and SP Information
- Modifying Oracle ILOM Configurations
- Configuring the Host-to-ILOM Interconnect
- Managing Oracle ILOM and Host Watchdog
- 8 Using nvmeadm to Configure an NVM Express Device
-
9
Using raidconfig to Configure
RAID
- raidconfig Command Overview
- Listing Controller, RAID and Disk Information
- Creating and Deleting RAID Volumes
- Adding and Removing Disks and RAID Volumes
- Modifying a RAID Volume or Controller
- Starting or Stopping a Task on a Disk or RAID
- Restoring or Clearing a RAID Controller Configuration
- Exporting or Importing a RAID Volume Configuration
- Creating RAID Volumes With Partial Disks
- 10 Using ubiosconfig to Update the UEFI BIOS
- 11 Using zoningcli to Configure Zoning for the SPARC T3-1 Server
- 12 CLI Tools Error Codes
- Index