Documentation, Support, and Training
Reviewing Front and Rear Panels
Install the System With the Express Rail Kit
(Optional) Install the System With the Standard Rail Kit
(Optional) Install the Cable Management Arm (CMA)
Remove the System From the Rack
Remove the Express Slide Rails from the Rack
Remove the Standard Slide Rails from the Rack
Connecting to Host Bus Adapters (HBAs)
(Optional) Install the Power Cord Retainer
Access Configuration (Zoning) Guidelines
Sun Storage F5100 Flash Array Overview
Obtaining the Chassis Serial Number
Choosing a Method for Diagnosing Faults
Diagnosing Faults With Sun StorageTek Common Array Manager Software
Diagnosing Faults With LEDs and Indicators
Preparing to Service the System
Performing an Antistatic Discharge
Customer-Replaceable and Field-Replaceable Components
Replacing an Energy Storage Module
Replacing the Motherboard Assembly
Replacing a Power Distribution Board
Replacing the Connector Board Assembly
Replacing the Energy Storage Backplane
Returning the System to Service
Install the Chassis to Maintenance Position
Return the System to the Fully Installed Position
The SunStorage F5100 Flash Array supports Access Configuration (also known as zoning) using Sun Storage Common Array Manager. Zoning is a configuration method that allows each host, or host port, to have its own dedicated storage resources. Zoning allows for storage resource segregation, controlled resource sharing, protection, and topology control. Zoning is done on a per host, per FMod basis for the SunStorage F5100 Flash Array.
The minimum requirements for zoning are:
Sun Storage CAM version 6.7 or higher running on a management host directly connected to the F5100 Array, or a supported Sun Storage CAM data host directly connected to the F5100 running the Sun Storage CAM proxy agent software.
A supported LSI-based HBA connected to the array, with the required firmware patch.
See the SunStorage F5100 Flash Array Product Notes for the latest information on supported HBA information, including where to download the required firmware patch.
For more information on Access Configuration, see the Sun Storage CAM documentation available online at: http://download.oracle.com/docs/cd/E19377-01/index.html