Power the Server Off or On (Oracle ILOM)
You can use Oracle Integrated Lights Out Manager (ILOM) to remotely power on or power off the server.
Before you perform the following procedure, ensure that you have Admin (a) role privileges in Oracle ILOM.
 | Caution - To completely power off the server, you must disconnect the power cords from the back panel of the server. |
 | Caution - Data loss. An immediate shutdown abruptly closes all applications and files without saving changes. |
-
To change the server power state in the Oracle ILOM web interface, perform
the following steps:
-
Log in to the Oracle ILOM web interface.
For instructions, see Accessing Oracle ILOM.
- In the navigation pane, click Host Management > Power Control.
-
In the Select Action drop-down menu, select a power control
option.
For descriptions of the power control options, see Power Control Options.
-
Log in to the Oracle ILOM web interface.
-
To change the server power state in the Oracle ILOM command-line interface
(CLI), perform the following steps:
-
Log in to the Oracle ILOM CLI.
For instructions, see Accessing Oracle ILOM.
-
Use one of the following commands:
- To reset the server, type reset /System.
- To gracefully shut down the server, type stop /System.
- To immediately shut down the server, type stop -f /System.
- To power on the server, type start /System.
-
Log in to the Oracle ILOM CLI.
- If you are prompted to confirm your choice, type y, and then press Enter.
Related Information
-
Controlling Host Power, Oracle ILOM Administrator's Guide for Configuration and Maintenance, Firmware Release 3.2.x