Oracle^® X6 Series Servers Administration Guide

Reset the Oracle ILOM Firmware to Default Settings (Oracle ILOM)

1. To reset the Oracle ILOM firmware to default settings in the Oracle ILOM web interface, perform the following steps:
   1. Log in to the Oracle ILOM web interface.

      For instructions, see Accessing Oracle ILOM.

   2. In the navigation pane, click ILOM Administration > Configuration Management, and then click the Reset Defaults tab.
   3. In the Reset Defaults drop-down list, select Factory.
   4. Click Reset Defaults.
2. To reset the Oracle ILOM firmware to default settings in the Oracle ILOM command-line interface (CLI), perform the following steps:
   1. Log in to the Oracle ILOM CLI.

      For instructions, see Accessing Oracle ILOM.

   2. Type set /SP reset_to_defaults=factoryset.

Related Information

• Reset the Oracle ILOM Configuration to Factory Defaults, Oracle ILOM Administrator's Guide for Configuration and Maintenance, Firmware Release 3.2.x at http://www.oracle.com/goto/ilom/docs