Modifying iSCSI Virtual Drive Properties
In UEFI Boot Mode, you can use iSCSI virtual drives to run supported operating systems
that reside on an external server. This section describes how to configure iSCSI virtual
drives using the BIOS Setup Utility.
Note -
iSCSI is not available in Legacy BIOS Boot Mode.
Required Information for iSCSI Configuration
Before you begin configuring iSCSI virtual drive properties in the BIOS Setup
Utility, ensure that you have gathered the following information from the iSCSI
server:
|
|
|
Target name
|
iqn.1988-12.com.oracle:platform-target
|
|
iSCSI initiator name
|
iqn.1988-12.com.oracle:0010E02E458F
|
Note -
iSCSI requires iSCSI Qualified Names (iqn) formats for its
initiator and target names.
|
|
|
Logical Unit Number
|
LUN 0
|
|
IP address of iSCSI server
|
192.167.1.24 (IPv4)
|
|
Port number
|
3260
|
|