ok probe-scsi-all /pci@400/pci@1/pci@0/pci@cLSI,sas@0 FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00 Target 9 Unit 0 Disk SEAGATE ST9300003SSUN3006 0B70 585937500 Blocks, 300 GB SASDeviceName 5000c50033438dbb SASAddress 5000c50033438db9 PhyNum 0 Target b Unit 0 Dusj SEAGATE ST930003SSUN300G 0468 585937500 Blocks, 300 GB SASDeviceName 5000c50005c15803 SASAddress 5000c50005c15801 PhyNum 1 Target c Unit 0 Elcl Serv device SUN NEM Hydra II SOL 0308 SASAddress 5080020000bb193d PhyNum 24 /pci@400/pci@1/pci@0/pci@0/pci@0/usb@0,2/hub@3/storage@2 Unit 0 Removable Read Only device AMI Virtual CDROM 1.00
LSI,sas@0 – Disk controller (a REM in this example). If the server has more than one disk controller, the target drives associated with each controller are listed following that controller's information.
SASDeviceName – WWN that Oracle Solaris recognizes.
SASAddress – WWN that OpenBoot references.
PhyNum – Physical slot that the drive occupies (the value 0 indicates a drive in HDD slot 0).
For this example, you construct a name like this to indicate the drive in slot 0.
cn = c0
n is the SAS controller number.
tWWN = t5000c50033438dbb
WWN is the SASDeviceName value.
dn = d0
n is 0 for all embedded SCSI devices.
The completed logical device name is c0t5000c50033438dbbd0.