Go to main content
Oracle EDR InfiniBand 交换机和虚拟化 I/O 系统管理指南

退出打印视图

更新时间: 2016 年 11 月
 
 

/SYS 主板机箱目标和属性

对 /SYS/MB 目标使用 show 命令可显示有关主板的信息和状态。使用 set 命令可配置 clear_fault_action 属性以手动清除主板故障。


注 -  未列出标为 Not Supported 或 N/A 的属性。
Oracle ILOM 目标
属性
说明
/SYS/MB
  • type = Motherboard

  • ipmi_name = MB

  • fru_description = PCBA, W/MECHANICALS, NM3, LEAF

  • fru_manufacturer = Oracle Corporation

  • fru_part_number = 7092208

  • fru_rev_level = 06

  • fru_serial_number = 489090M+1507RP0005

  • fru_macaddress = 00:10:e0:56:83:85

  • fault_state = OK

  • clear_fault_action = (none)

主板管理。
/SYS/MB/T_AMB
  • type = Temperature

  • ipmi_name = MB/T_AMB

  • class = Threshold Sensor

  • value = 32.000 degree C

  • upper_critical_threshold = 40.000 degree C

  • lower_critical_threshold = 0.000 degree C

  • lower_nonrecov_threshold = -10.000 degree C

  • alarm_status = cleared

主板环境温度信息。
/SYS/MB/T_HCA
  • type = Temperature

  • ipmi_name = MB/T_HCA

  • class = Threshold Sensor

  • value = 74.000 degree C

  • upper_nonrecov_threshold = 110.000 degree C

  • upper_critical_threshold = 100.000 degree C

  • upper_noncritical_threshold = 90.000 degree C

  • lower_critical_threshold = 0.000 degree C

  • alarm_status = cleared

IB HCA 环境温度信息。
/SYS/MB/T_IBSWITCH
  • type = Temperature

  • ipmi_name = MB/T_IBSWITCH

  • class = Threshold Sensor

  • value = 81.000 degree C

  • upper_nonrecov_threshold = 110.000 degree C

  • upper_critical_threshold = 100.000 degree C

  • upper_noncritical_threshold = 90.000 degree C

  • lower_noncritical_threshold = N/A

  • lower_critical_threshold = 0.000 degree C

  • alarm_status = cleared

IB 交换机环境温度信息。
/SYS/MB/T_OUT
  • type = Temperature

  • ipmi_name = MB/T_OUT

  • class = Threshold Sensor

  • value = 36.000 degree C

  • upper_nonrecov_threshold = 75.000 degree C

  • upper_critical_threshold = 65.000 degree C

  • upper_noncritical_threshold = 50.000 degree C

  • lower_critical_threshold = 0.000 degree C

  • lower_nonrecov_threshold = -10.000

  • alarm_status = cleared

主板流出温度信息。
/SYS/MB/V_BAT
  • type = Voltage

  • ipmi_name = MB/V_BAT

  • class = Threshold Sensor

  • value = 2.988 Volts

  • lower_noncritical_threshold = 2.548 Volts

  • alarm_status = cleared

主板电池电压信息。

相关信息