How to Install the CPU Module (CMOD) Cover
Before You Begin
About Sun Server X2-8 CPU Modules and CMOD Filler Modules
- Set the cover on top of the CMOD with the cover release
button toward the front of the module and with approximately 0.5 inch of
the cover overhanging the rear of the module.
This leaves a gap of approximately 0.5 inch between lead edge of the
cover and front top edge of the CMOD chassis. The cover should sit
evenly on top of the module.
- Slide the cover toward the front of the module until it stops, taking
care that the lead edge of the cover slides under the front
top edge of the CMOD.
When the cover is properly installed, this action produces a click sound as
the cover latch engages and locks the cover.
- Ensure that the cover is locked in place.
The cover should not move unless the release button is pressed.
How to Install a CPU Module (CMOD)
How to Remove the CPU Module (CMOD) Cover