Blade Features

Feature	Description
Chassis compatibility	Sun Netra 6000 modular system with PCIe 2.0 midplane (standard with models A90–B and A90–D). The minimum Oracle ILOM CMM firmware for each chassis is as follows: A90–B: CMM ILOM 3.0.12.11b (software release 3.3.3) A90–D: CMM ILOM 3.1 (software release 4.2)
Chassis midplane and internal I/O	Two x8 PCIe 2.0 bus connections to a chassis PCIe EM slot One x8 PCIe 2.0 bus connection to REM slot Two x8 PCIe bus connections to FEM slots. PCEIe port speeds vary by FEM Two 10/100/1000/10000 BASET Ethernet ports for NEMs from the FEM
CPUs	Supports two CPUs, which are Intel Xeon Eight-Core E5-2658, 2.1GHz, 20MB Cache, 8.0 GT/s QPI,Turbo Boost, 95W with Heatsink
Rear I/O	Dual internal USB drive ports in the rear of the blade. Most blades have Oracle System Assistant installed on USB drive in port 0. See Setting Up Software and Firmware for important information regarding port limitations and OSA setup.
Front panel I/O	A universal connector port (UCP) is available for use with the multiport (dongle) cable. The multiport cable provides the following interface connections: VGA graphics port RJ-45 serial management port Dual USB ports (keyboard, mouse, USB drive) The front panel also has two front and two internal USB 2.0 ports.
Memory	24 registered DDR3 DIMMs with ECC memory slots total (12 slots per CPU). See the Netra Blade X3-2B Product Notes for details on supported memory.
Network express module (NEM) compatibility	Both 10 GbE and 1 GbE NEM interfaces are supported. See the Netra Blade X3-2B Product Notes for details on the supported NEMs.
Operating systems	Oracle Solaris can be optionally preinstalled on the blade. Operating systems such as Oracle Solaris, Linux, and Windows are supported. For a complete list of supported OS versions for your blade, see the Netra Blade X3-2B Product Notes.
Virtualization software	Oracle VM software is supported and can optionally be preinstalled on the blade. VMware ESXi is also supported for the blade. For information about versions supported, see Netra Blade X3-2B Product Notes.
Service processor (SP)	The AST2300 SP provides IPMI 2.0 compliant remote management capabilities. The SP features: Oracle Integrated Lights Out Manager (ILOM version 3.1) Local Oracle ILOM command-line access using a serial connection 10/100 management Ethernet port to midplane Remote keyboard, video, mouse, and storage (KVMS) over IP
Storage	Four SAS/SATA 2.5-inch disk bays. See the Netra Blade X3-2B Product Notes for details on supported hard drives. Two internal USB 2.0 ports, accessible when the blade is removed from the chassis. Two front panel USB 2.0 ports. Two optional LSI REM host bus adapters are supported: Sun Storage 6Gb/s SAS REM HBA (SGX-SAS6-REM-Z) Sun Storage RAID 6Gb/s SAS RAID REM HBA, (SGX-SAS6-R-REM-Z) For more information, see Preparing the Storage Drives to Install an Operating System.
Video	A maximum resolution of 1280x1024 is supported with 8 MB of video memory.

Skip Navigation Links
Exit Print View
	Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection

Blade Features

Related Information