|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
Pc-Check is a DOS-based diagnostic utility that is integrated into Oracle ILOM that enables you to detect and test all motherboard components, ports, and slots. Pc-Check has four operating modes that you can run either from Oracle ILOM:
Enabled -- Run a predefined set of diagnostics when the server starts up.
Extended -- Run a comprehensive test suite of diagnostics when the server starts up.
Manual -- Run only the diagnostics that you specify when the server starts up.
Disabled -- Do not run Pc-Check diagnostics when the server starts up.
You can also send a non-maskable interrupt (NMI) to the host operating system using Oracle ILOM. An NMI is a high-priority interrupt that reports system errors that cannot be ignored by other interrupts. Note that sending an NMI to the host operating system could cause the host to stop responding and wait for input from an external debugger. Therefore, use this feature only when instructed to do so by Oracle Services personnel.
For more information about Pc-Check diagnostics, see the Oracle x86 Servers Diagnostics Guide for servers with Oracle ILOM 3.1. For instructions on how to run Pc-Check and how to generate an NMI from Oracle ILOM, see “Troubleshooting Oracle ILOM Managed Devices” in Oracle ILOM 3.1 User's Guide.