|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
When a server component fails, the server generates a component-specific fault that is captured by Oracle ILOM SP. Some faults are cleared automatically when the failed component is replaced, but faults generated for components that are not hot-serviceable must be cleared manually. You can use Oracle ILOM CLI to clear faults.
For the Netra Blade X3-2B, the following types of faults must be cleared manually after the faulty component is replaced:
DIMM (memory module) faults
Processor (CPU) faults
PCIe faults (network ports and hot-pluggable PCI-Express Modules (PEMs))
Motherboard faults (not necessary if the Netra Blade X3-2B is replaced)
To clear DIMM, processor, PCIe, and motherboard faults, access Oracle ILOM CLI and clear the fault. For instructions, see Service, Servicing Blade Components.
In addition, the following fault does not require replacement of a faulty component; however, user action is required to clear the fault:
This fault is generated when the server's top cover is removed while the AC power cords are still connected to the power supply, that is, power is not completely removed from the server. To clear the fault.security.integrity-compromised@/sys/sp fault, replace the server's top cover, and reboot the server's SP.