|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
The Configure Network task enables you to configure network settings for the server. To ensure that the server has the most up-to-date tools and drivers, configure network settings during initial server installation and setup.
Note - You must configure the network settings before you can use the Get Updates task in Oracle System Assistant.
To configure the network settings using Oracle System Assistant:
Before You Begin
Obtain your system's network information, such as the name server for a static IP, as required.
The Configure Network screen is displayed.
The drop-down list identifies the devices that are visible to the server.
Select one of the following methods to determine the IP address of the server:
Disabled: Do not allow network access for this device.
DHCP: Automatically assign an IP address to the server using Dynamic Host Control Protocol (DHCP). When this option is selected, you can select the Auto DNS via DHCP option to automatically assign the name server IP address and search domain. If you do not select the Auto DNS via DHCP option, you must also provide the following information:
Name server IP address
(Optional) Search domain
Static: Assign a fixed IP address to the server. You must provide the following information:
Server IP address
HTTP Proxy Configuration: Select this option if you want to use a proxy server. You must provide the following information:
The system prompts for confirmation to apply the network settings and to disable all other interfaces.