|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
The Update Firmware task determines whether an update is available by comparing the firmware versions in the most recent platform software release to the currently installed server system and device firmware. You can preview the changes, compare version numbers, manually select which components to update, or choose to update all firmware components. It is highly recommended that you choose to update all firmware components.
Some firmware components require a server reboot immediately following a firmware update. If required, the server might automatically reboot when the update process finishes.
To update firmware using Oracle System Assistant:
Before You Begin
Use the Get Updates task to download the most recent platform software release from Oracle before you update firmware.
The Update Firmware screen is displayed.
The system performs the firmware update check and the Firmware Update Check progress box is displayed.
The Firmware Update Install Changes dialog is displayed.
You can also review the Component Name, Device Name, Firmware/BIOS Installed, and Firmware/BIOS Available.
Note - Components that are up to date cannot be updated and, therefore, are not selectable.
The update firmware progress bar is displayed.
Wait while the system updates the firmware.
Caution - If a server reboot is required for the firmware updates to take effect, the system reboots automatically.