|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
Use this procedure to make a virtual drive bootable when you have created more than one virtual drive (RAID volume) with an SG-SAS6–R-REM-Z HBA using the LSI BIOS Configuration Utility.
You do not need to follow this procedure if any of the following is true:
You used Oracle System Assistant to create a volume and make the volume bootable.
You have an SG-SAS6–REM-Z HBA.
You have created only one virtual drive using the LSI BIOS Configuration Utility.
Before You Begin
Create at least one virtual drive on the SG-SAS6–R-REM-Z HBA using the LSI BIOS Configuration Utility.
Note - If you just finished creating a virtual drive, you might already be at the WebBIOS screen. If you have exited the WebBIOS utility, follow Step 2 and Step 3 to reach the WebBIOS main menu.
See the Netra Blade X3-2B Administration Guide for more information.
The Adapter Selection screen is displayed.
The MegaRAID BIOS Configuration Utility Virtual Configuration screen is displayed.
The Virtual Drives screen is displayed.
When the operation is successfully completed, the Set Boot Drive value for this virtual drive shows (current=selected VD).
Netra Blade X3-2B Installation Guide for ESX Software
Netra Blade X3-2B Installation Guide for Linux Operating Systems
Netra Blade X3-2B Installation Guide for the Oracle Solaris Operating System
Netra Blade X3-2B Installation Guide for Oracle VM Operating System
Netra Blade X3-2B Installation Guide for Windows Operating Systems