|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
There are four Sun Netra 6000 modular system hassis models. Two are AC and two are DC. Ensure that the modular system chassis in which you will install the blade is running with supported hardware and firmware and has no faults. Check the following:
The chassis midplane supports PCIe 2.0 (standard with model N6000-AC or N6000-DC). See the Sun Netra 6000 Modular System Product Notes for the latest information about how to determine your midplane version.
The chassis monitoring module (CMM) has at least the minimum firmware version that corresponds with the chassis model as follows:
A90–B: CMM ILOM 22.214.171.124b (software release 3.3.3)
A90–D: CMM ILOM 3.1 (software release 4.2)
All required power and data cables to the chassis are attached.
The network express modules (NEMs) that are supported for use with your blade have been installed in the chassis and are operating without faults. For more information about supported NEMs, see Netra Blade X3-2B Product Notes.
For information about installing chassis components, attaching cables to the chassis, and powering on the chassis, see the Sun Netra 6000 modular system documentation at: http://docs.oracle.com/cd/E19938-01/