|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
If you removed the blade from the chassis, replace it:
Pull the lever out and eject the blade filler panel.
Do not discard the blade filler panel.
Caution - Do not operate the chassis with empty slots. Always insert a blade filler panel into an empty slot within 60 seconds to reduce the possibility of blade shutdown due to overheating.
The following illustration shows the blade being inserted into the Sun Netra 6000 chassis. Your chassis might differ.
The blade is now flush with the chassis, and the ejectors are locked.
If the chassis is powered on, the blade comes up to standby power. The green OK LED on the front panel blinks (0.2 seconds on, 2.8 seconds off).