Set the Server Module to a Ready-to-Remove State

Language:

Perform this task before you remove the server module from the modular system.

Ensure that the host is powered off.

Perform one of these commands according to the way that you logged into Oracle ILOM:

From the CMM, type.

-> show /Servers/Blades/Blade_n/System power_state
  /Servers/Blades/Blade_5/System
    Properties:
        power_state = Off

From the server module, type.

-> show /System power_state
/System
 properties:
  power_state = Off

If the host is not powered off, power the host off.
- From the CMM, type.
```
-> stop /Servers/Blades/Blade_n/System
```
- From the server module, type.
```
-> stop /System
```

Prepare the server module for removal.

Perform one of these commands according to the way that you logged into Oracle ILOM:

From the CMM, type.

-> set /Servers/Blades/Blade_n/SYS prepare_to_remove_action=true
Set 'prepare_to_remove_action' to 'true'

From the server module, type.

-> set /SYS prepare_to_remove_action=true
Set 'prepare_to_remove_action' to 'true'

Confirm that the server module is in standby mode by viewing the blue Ready to Remove LED on the front of the server module.
See Front and Rear Panel (Service) to locate this LED. If the Ready to Remove LED is on, the server module is ready for removal from the modular system chassis.

Remove the server module from the chassis.
See Remove the Server Module From the Modular System.

SPARC T5-1B Server Module Service Manual