Understanding the Installation
Understanding Management and Power Cabling
Management Connection Overview
Single-Switch Location Guidelines
Attach the Rails to the Switch
Attach Telco Adapters to the Rack Slides
Attach the Rack Slides to the Rack
Install the Switch Into the Rack
Install the Air Duct and Front Support
Attach Data and Management Cables
Prepare the Front Support and Small Air Duct
Configure Network Management From the CLI (SER MGT)
Log Into the Oracle ILOM Web (NET MGT)
Log Into the Oracle ILOM CLI (NET MGT)
Note - By default, the switch is configured to use DHCP to automatically obtain an IP address.
Note - You must configure an externally accessible IP address on the switch to use SNMP. Refer to the following documentation for more information on using SNMP with the switch: Sun Integrated Lights Out Manager (ILOM) 3.0 Management Protocols Reference Guide and Oracle Switch ES1-24 Configuration Guide.
Log into the Oracle ILOM web interface.
Log into the Oracle ILOM CLI.