SPARC T7-4 Server Service Manual

Determine if the SPM Is Faulty

The following LEDs are illuminated when a SPM fault is detected:

• System Service Required LEDs on the front panel and rear I/O module

• Server SP LED on the main module or rear I/O module

1. Determine if the Server Service Required LEDs are illuminated on the front panel or the rear I/O module.

   See Interpreting LEDs.

2. Check the SP LED on the main module or the rear I/O module to determine if the SPM needs to be replaced.

   See Main Module LEDs or Rear Panel Controls and LEDs. The SP LED is illuminated amber if the SPM needs to be replaced.

3. Remove the faulty SPM.

   See Remove the SPM.

Related Information

• Remove the SPM

• Install the SPM

• Verify the SPM