AC Power Block Overview
Fan Module Controller Board (FB) Overview
How to Install the Subassembly Module
Midplane Overview
How to Remove the Subassembly Module
Standard Scripts
Using the ILOM to Monitor the Host
How to Use the ILOM Command-Line Interface to View the Sensor Readings
How to Use the ILOM Web Interface to View the Sensor Readings
SP Module Multi Port Cable Overview
How to Connect to the Host’s Serial Console Using the ILOM Command-Line Interface
How to Find the Server’s Serial Number
Attaching Administration (SP) Cables
Attaching Administration (SP) Cables
How to Connect to the Server Using the Server’s IP Address
Server and Component Overview
How to Power Off the Server
How to Apply Standby Power for Initial Service Processor Configuration
How to Remove the Server From the Rack
How to Find the Server’s Serial Number
Sun Fire X4800 Server Specifications
Server Connections
How to Find the Server’s Serial Number
Front Panel Indicator Module Overview
How to Update the CPLD From Service Mode
Diagnostic Tools
About ILOM SP IP Addresses and the ILOM Interfaces
About ILOM SP IP Addresses and the ILOM Interfaces
How to Gather Service Visit Information
How to Use an Antistatic Mat
CRU and FRU List
Antistatic Precautions and Procedures
Hot-Swap Components
Important Safety Information
How to Prepare for Operation
How to Prepare for Service
Service Task Table
Required Service Tools
Setting Up the Preinstalled Solaris Operating System
How to Internally Inspect the Server
How to Create a Snapshot With the ILOM Command-Line Interface
How to Create a Snapshot With the ILOM Web Interface
SNMP and PET Traps
SNMP and PET Traps
Obtaining Solaris 10 Documentation
Identifying Logical and Physical Network Interface Names for Solaris 10 OS Installation
Identifying Logical and Physical Network Interface Names for Solaris 10 OS Installation
How to Identify Logical and Physical Network Interface Names
Obtaining Solaris 11 Express Documentation
Choosing an Installation Method
Choosing an Installation Method
Introduction to Oracle Solaris OS Installation
Preliminary Tasks Before Installing An OS
Preliminary Tasks Before Installing An OS
Solaris OS Installation Tasks
Sun Fire X4800 Server Subassembly Module Overview
SP Module and CMOD Firmware Compatibility Considerations
How to Install the SP Module
Service Processor (SP) Module Overview
How to Remove the SP Module
Attaching Administration (SP) Cables
Interpreting Event Log Time Stamps
Acoustic Specifications
Sun Fire X4800 Server Specifications
How to Connect to the ILOM CLI Using SSH
Introduction to Oracle ILOM Software
How to Update the CPLD From Oracle SunService
Diagnostic Tools
Using SunVTS Diagnostics Software
SunVTS Documentation
Introduction to SunVTS Diagnostic Test Suite
How to Diagnose Server Problems With the Bootable Diagnostics CD
Installing Supplemental Software
Supported Windows Operating Systems
How to Create a PXE Installation Image for SLES
Installing SLES From Distribution Media
Installing SUSE Linux Enterprise Server
How to Install Linux From a PXE Server
How to Download SLES Media Kits
Configuring a Linux Server to Support PXE Installation
Updating SLES
How to Update the SLES Drivers
How to Identify Logical and Physical Network Interface Names
How to Configure PXELINUX on Your PXE Server
How to Connect to the Server Locally (Physical Console)
Fan Module Overview
Viewing the ILOM System Event Log
How to View the System Event Log With the ILOM Command-Line Interface
How to View the System Event Log Using the ILOM Web Interface
How to Power On All Server Components