Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Service Procedures
Inspect the Power Supply Hardware
Inspect the Power Supply Connectors
Servicing the Fabric Cards and Fabric Card Fillers
Inspect the Fabric Card Chassis
Inspect the Fabric Card Retainer Bolts
Inspect the Fabric Card XBOW Connectors
Remove a Fabric Card or Fabric Card Filler
Install a Fabric Card or Fabric Card Filler
Servicing the InfiniBand Cables
Inspecting the InfiniBand Cables
Inspect the InfiniBand Cable Hardware
Inspect the InfiniBand Cable Connectors
Inspect the Line Card XBOW Connectors
Inspect the Line Card CXP Connectors
Doing Supportive Software Tasks
The two retainer bolts on the line card serve three purposes:
Align the line card for proper insertion into the chassis.
Allow final insertion of the line card into the chassis and simplify the physical connection of the line card connectors to the midplane connectors.
Allow extraction of the line card from the chassis and simplify the physical disconnection of the line card connectors from the midplane connectors.
Identify the prerequisite and subsequent tasks you must perform in conjunction with this procedure, to achieve a goal.
See the table in Inspecting the Line Cards.
Ensure that the retainer bolts look finished, are clean, rotate smoothly, do not bind, or do not feel loose or sloppy in any way.
Inspect the XBOW connectors.