To Verify Attached Storage (Oracle SPARC Systems)

• If online storage is connected to the Converged Network Adapter, use the show-children command to list the attached storage.

  ---

  Note - You might need to run the reset-all command before using the show-children command.

  ---

  In the following example, a RAID device shows one target and 10 LUNs attached to an FCoE switch connected to one port of a dual-port Converged Network Adapter.

  {0} ok show-disks
  a) /pci@7c0/pci@0/pci@8/SUNW,qlc@0,3/fp@0,0/disk
  b) /pci@7c0/pci@0/pci@8/SUNW,qlc@0,2/fp@0,0/disk
  c) /pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2/disk
  d) /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom
  e) /pci@7c0/pci@0/pci@1/pci@0/ide@8/disk
  q) NO SELECTION
  Enter Selection, q to quit: b
   
  {0} ok select /pci@7c0/pci@0/pci@8/SUNW,qlc@0,2 
  QLogic QEM8152  Host Adapter FCode(SPARC): 3.15 2013-01-11 19:29
  ISP Firmware version 5.03.02
  MPI FW version 1.39.00
   
  {0} ok show-children
  Adapter portID - 11401 
  ************** Fabric Attached Devices **************
   Dev# 0(0)   PortID 10500    Port WWN 200600a0b819e3b8
   LUN    0(0)    DISK  SUN     CSM100_R_FC     0619
   LUN    1(1)    DISK  SUN     CSM100_R_FC     0619
   LUN    2(2)    DISK  SUN     CSM100_R_FC     0619
   LUN    3(3)    DISK  SUN     CSM100_R_FC     0619
   LUN    4(4)    DISK  SUN     CSM100_R_FC     0619
   LUN    5(5)    DISK  SUN     CSM100_R_FC     0619
   LUN    6(6)    DISK  SUN     CSM100_R_FC     0619
   LUN    7(7)    DISK  SUN     CSM100_R_FC     0619
   LUN    8(8)    DISK  SUN     CSM100_R_FC     0619
   LUN    9(9)    DISK  SUN     CSM100_R_FC     0619